5 Cubic Meter Vacuum Truck ISUZU

Posted on by

 

ISUZU vacuum truck

The 5 cubic meter ISUZU vacuum truck has a specially designed chassis from ISUZU., and a sewage container, vacuum pump, four-way valve, and spill-proof valve. The waste pump has a powerful suction force and long suction stroke.

Applications
This Sewer Jetting Vacuum Truck works particularly well for sucking, transporting and disposing of waste. The 5 cubic meter vacuum truck can also be used for watering, water transporting, firefighting, or drought relieving.

Features
1. With a suction stroke of 10m, it only takes about 5 minutes to fill the container.

  1. Waste can be disposed using pressure or gravity. Additionally, the back cover can be opened to unload waste.
  2. This multifunctional vacuum truck is fast and convenience to operate. Besides direct filling, automatic loading and unloading are also available.
  3. The 5 cubic meter vacuum truck is composed of a power takeoff, transmission shaft, vacuum sewage suction pump, waste and gas separator, oil and gas separator, multiple directional control valve, pipes, suspender, and suction gun.
  4. The 5 cubic meter vacuum truck comes with a vacuum manometer, sewage inspection window (pipe) and hand washing device.
  5. The container has the following features:a. The container can be made of carbon steel or stainless steel, based on the customers’ needs.b. The 5 cubic meter vacuum truck has uniform width and thickness and tested welded joints.c. With the vacuum manometer, it only takes about 3 minutes to load waste.

    d. The suction depth is more than 4 meters and disposal is less than 3 minutes.

    e. The working pressure of the hydraulic system is 0.4Kpa and the pumping speed is 56L/s.

    f. Both automatic disposal and manual disposal are available.

 

 

Technical Parameters

Model PT5070JGK
Driving Type 4×2    (Left hand drive)
Wheelbase 3360 mm
Engine 88 kw (120hp)
Vacuum Tank Tank shape Cylinder
Material Carbon Steel
Dirty water tank 3000 ~5000  Liters
Thickness 5 mm
Dish thickness 5 mm
Designed pressure -0.9 bar
Strengthen ring Cool bended U shape, add the strengthen ring on the tank our circle
Over Pressure device Fixed on the top of the tank
Vacuum valve For keeping the tank’s inside vacuum
Safety support fix with safety valve during working
Rear Cover Operation Opened by hydraulic
Lock device Manual locking device
Seal Rigidity and manual synthetic rubber seal rings
Water discharge valve one way 100mm ball valve
Vacuum Pump Model As option
Working pressure 400 Pa
Flow rate 45 L/s
Color As option

Note
With the size of 3300×1310mm (Dia. ×L), the effective volume of the container for liquid sewage is 4.25 cubic meters. The density of the sewage shall be 900kg/m3. Boteld to the vehicle, the side and back protection device is made of Q235 carbon structural steel. 420mm high from ground, the sectional dimension of the back protection device is 100×50mm.

Food Waste Collection Truck ISUZU 5000L

Posted on by

The ISUZU food waste collection truck is particularly equipped to handle food waste so that food is properly disposed of and processed and so that the production of illegal cooking oil is reduced.

ISUZU food waste collection truck

Features
1. The isuzu kitchen garbage truck is made using a ISUZU NKR car body and has a wide and comfortable interior with good visibility for long driving. Air conditioning is optional.
2. The specially designed chassis and 120HP pressure intercooling engine for the Food Waste Collection Truck comes from ISUZU Company.
3. The food waste collection truck has multi-speed transmission and high fuel-efficiency.
4. The speed of the automatic lifting system can be adjusted. This closed garbage truck can handle both 120L and 240L garbage cans.
5. An interlocking protection device controlled electronically is imported from Japan and ensures safe operation.

Technical Parameters

Item unit parameter
Vehicle model food waste Truck
Chassis model ISUZU NKR
Overall dimensions mm 5995×2000×2550
Fact cubage M3 3
Mass in working order kg Appro×4385
Body internal dimensions mm 3000×1050
Wheel base 3300
F/R track base 1506/1466
Approach/departure angle ° 19/14
Exhaust/kw ml/kw 3856/70
Max speed km/h 90
Tire specification 7.00-16 Engine type 4KH1-TCG40
Traction system 4×2 transmission 5-speed with over drive
Number of axles 2 Electric system 12v
Operation control system Electrically hydraulic control Allowable passengers in cab 2,,3
Equipment power take off, transmission shaft, high pressure sewage tank, pipe network, sewage pipe for observing and cleanout equipment
Engine Dongfeng Chaoyang Diesel Engine Co.Ltd
Production cycle 15-20 days
Warranty 12 month,from the date of supply
FOB Shanghai USD

5 Cubic Meter ISUZU Fuel Tank Truck

Posted on by
Features
1. The 5 cubic meter ISUZU fuel tank truck is made with a newly developed chassis with high loading capacity.
2. The 4KH1-TC engine comes from ISUZU Company and is fuel-efficient.
3. The fuel oil tank truck comes with a computer-controlled and vehicle-mounted oiling machine for accurate refuelling.
1
Technical Parameters of Coal Tar Transportation Truck
Main specifications: 
Model PT5070GJY
Driving Type 4×2    (Left hand drive)
Wheelbase 3360 mm
Engine 88 kw (120hp)
Tyre 7.00-16
Tank Material: Carbon steel(Q345)
Shell Body 5 mm nominal thickness
Head 6 mm nominal thickness
Baffles 3mm nominal thick, wave shape, four pieces with Ø 500mm service port
Tank shape Ellipse
Capacity Full capacity 5000L
Compartment No
Shell Finish Shot blasted with 1anti-rust, 1 base coat and 1 finishing coat, the color of tank is according to customer requirement.
Testing Pressure 36kPa, Water pressure test
Tank Fittings Top inlet port 2pieces
Manhole Cover Aluminum alloy, 20” self-latching manhole cover, with air-van.
Outlet port: One pneumatic sea valve which at the front of tank, the size of outlet port is 3 inches, fix all connector.
Pipe box: It made of PVC material, round shape which on the both sides of tank, one plastic pipe (5m)
Anti –Static System: Static electricity plate , copper plate and earth cable reel
Tank Accessories Ladder: Stainless Steel ladder fixed at rear of tank
Walkway Platform: It fixed on the top of tank with anti – skid surface treatment.
Handrail: No
Fire Extinguisher Housing: 2 units, suitable for 4 kg’s fire extinguisher
Pump Device Yes
Flow meter Yes
Tool box Small box
Color As option

5Ton ISUZU Garbage Truck with Compactor

Posted on by

5 Ton ISUZU Garbage Truck with Compactor

1
The 5 ton garbage truck with compactor is developed with a ISUZU NKR car body and 1092 rear axle.
Features
1. The rubbish compactor garbage truck can be both manually and electrically controlled from inside or outside the cab with an imported multiport valve.
2. A built-in back pressure valve allows for bidirectional compaction, controlled by hydraulics.
3. Square or round garbage cans can be dumped into the manipulator. A trash hopper is also available.
4. Two 240L square garbage cans can be hung on the 5 ton garbage truck as the feeding device has a large volume for trash.
5. The overturn speed of the manipulator can be easily adjusted with a throttle valve.
6. Two large-volume sewage tanks are installed at the front and back of the 5 ton garbage truck. With the backflow sewage collection device, sewage enters the tanks automatically while a corrosion-resistant rubber seal reduces the chance or leaking during transport.
7. The connection between the carriage and the rear rubbish feeder is sealed with corrosion-resistant rubber to prevent sewage leakage. The self-locking feeder is controlled by hydraulics.
8. The bidirectional hydraulic lock is installed on the lifting system for safe usage.

Technical Parameters of Sanitation Garbage Truck

Chassis ISUZU NKR77
Model PT5070ZYS
Driving Type 4×2    (Left hand drive)
Wheelbase 3360 mm
Overall Dimension 6130×1980×2485 mm
Garbage Container capacity 3Cbm to 5Cbm
Loading type Rear loading
Compression ratio 1: 3.2
Operation control system Electrically hydraulic control + Manual hydraulic control
Discharging system Horizontal ejection
Loading cycle time:   (sec) 10~15
Rubbish discharging time: (sec) 20
Max hydraulic pressure (Mpa) 16.2
Feeding equipment lift angle ≥90
Multi-way shuttle valve Imported
Body material Weather resisting steel
Cab Forward control over engine, all-steel-welded construction
Engine Model: 4KH1-TCG40
Type: Diesel, turbo charged inter-cooled, 4 cylinder
Max. Power: 88 KW (120HP)
Gearbox MSB 5-shift, mechanical type, 5 forward and 1 reverse with
Tire 7.00-16
Color Red    (Any color & logos up to wish)
Max Speed 100 km/h

Note
其于的可以参考这个链接： http://www.isuzutruckscn.com/myanmar-3tons-isuzu-rubbish-compressed-truck-with-4kh1-engine_p16.html

ISUZU MAN Compressed Air Foam Fire Truck

Posted on by

4

Name Compressed Air Class A Foam Fire Vehicle
Model PT5150GXFAP24
Chassis Model Germamy MAN TGM18.280 4X2 BL
Engine Type and Power MAN D0836LFL51, 206kw
Max Speed(km/h) 100
Overall Size(mm) 7450(Without Trailer)×2430×3400
Number Of Seats 6
Gross Weight(kg) 15000
Load Capacity
(Kg)		 Foam(L) Class A(L) 200 Class B(L) 200
Water(L) 2000
Fire Pump Type/Model FPN10/3000 Type / Single-stage Centrifugal Pump (rear)
Rated Rotate Speed(r/min) 3000
Rated Flow Rate (L/min) 3000
Pressure(MPa) Rated pressure (MPa) 1.0 Maximum Pressure (MPa) 1.5
Fire Monitor Type/Model Pokex Water / Foam Double Purpose Monitor Manually, Can Up and Down (Height 500 mm)
Flow Rate(L/s) Foam(L) 2200 Water(L) 2000
Throw Range(m) Foam(L) 45 Water(L) 50
Compressed Air Foam
Extinguishing System		 Type/Model OS3100e /One-Seven Type Built-in Vehicle
Water Consumption (L / Min) 440
Working Pressure (Mpa) 0.8
Rate(L/min) 3600
mixing Ratio One-seven Class A Foam Mixing Ratio 0.3% One-seven Class B Foam Mixing Ratio 0.5%
ISUZU Fire Fighting Vehicle (also called as Isuzu Foam Fire Fighting Vehicle,Fire Engine, Fire Fighting Vehicle,ISUZU water tank fire fighting vehicle, water tender fire truck for sale,Brand New Fire Fighting Trucks,Japan double cabin fire truck, fire fighting truck,water pumper fire fighting truck )
More Isuzu Water Foam Fire Trucks pls check our website:  http://www.isuzutruckscn.com/fire-fighting-vehicles_c36
Our Hot sale products in 2016
———————————————–
Follow me on:
 
 
——————————
Best ISUZU Special Truck Manufacturer in China
Mobile: +86 13677218585  Tel/Fax: +86 7223829200
Viber / Whatsapp: +86 13677218585

 

The Development of the Garbage Truck

Posted on by

Garbage trucks are now an essential part of the modern civilization. One can see a number of refuse trucks running on the roads and streets in the late night or in the early morning. Trash trucks are the most important vehicles to keep our surroundings clean and healthy. Hook Arm Garbage Truck picks up the garbage from different parts of the city or town and off loads it in the garbage dumping grounds or waste management sites established for this purpose. There are a number of websites where you can collect useful information about these refuse trucks and used garbage trucks. With the increasing urbanization, generation of garbage from all the households has substantially increased. One can not imagine about clean and pollution free environment without the existence of these useful vehicles.

Hook Arm Garbage Truck

Basically, there are five types of garbage trucks- front loaders, rear loaders, grapple truck, pneumatic collection and side loaders. These are used at different places according to the various types of job requirements. Initially, wagons and animals were used to carry away waste but with the passage of time and some technological advancement in the field of automotives, Aerial Working Platform Trucks with open tops were introduced in the year 1920. The trucks with their open type left a stinking air with their movement and the garbage was also seen to spill over. To overcome this problem, trucks with covered tops were made and used for this purpose. To begin with, these trucks were used first time in the densely populated countries of Europe and North America and subsequently in the rest part of the world.

It was felt that it is quite a difficult task for the garbage collectors to lift the waste to the shoulder height and then put it into the Barrel Type Garbage Truck. To solve this problem, hopper model in the year 1929 was introduced which was based on the cable system to lift the garbage from the ground. In 1937, George Dempster came forward with a model in which waste containers with wheels were made to tip into the waste carrying vehicles. This model was known as dumpster. In the year 1938, with the introduction of the Garwood load packer, there was a revolutionary change in the field of garbage disposal vehicles. These load packers had the novel concept of compactors being attached to a garbage truck. With the use of a hydraulic press, the capacity of a waste truck was almost doubled.

In the year 1955, the first front loader dumpster was launched in the market but these front loading vehicles were not more commonly seen till the year 1970. During the middle part of the 1970s, Peterson industries manufactured first ever grapple truck for disposal of garbage in municipal areas. In the year 1997, Lee Rathbun came forward with the rear steer system in a refuse truck. This system enabled the driver to drive and operate the loader simultaneously with the help of an elevated, rear facing cab. This increased the speed of garbage disposal in a considerable manner. More details at isuzutruckscn.

Many Uses of High Pressure Washers

Posted on by

QQ拼音截图未命名

High pressure washers, also called pressure washers or high pressure cleaners, are Isuzu high pressure sewer jetting truck  that shoot out jets of water with high pressure. They are excellent for cleaning surfaces when a garden hose isn’t getting the job done. Because the water is propelled from the cleaner with such pressure, dirt and dust is easily removed from just about any surface. There are many uses for these washers that the average home owner can take advantage of.

 

House Siding

 

Whether you are washing grubby vinyl siding or wood planked siding, a High pressure industrial cleaning Vehicle can be your best friend. If the exterior of your home has never been cleaned you’ll especially notice the difference. Using it to clean siding can leave you with a home that looks almost brand new. They are excellent at removing loose paint from wood siding if you are preparing to repaint your home. Any home owner that has spent days removing loose paint with a pain scraper will appreciate how quickly and easily they can get the job done.

 

Sidewalks and Driveways

 

Over time, loose dirt, sand and other debris can settle onto your concrete pathways and in between the cracks making the paths look dingy. Using a pressure cleaner on these areas will remove any dirt that has been clinging to the surface and any that has found its way into cracks and crevices. Pressure washers are also great at blowing weeds and grasses from between slabs of brick or pavers.

 

Decks

 

Just like concrete, decks seem to be a beacon for dirt and grime. It’s especially important for the health of the wood to give it a good wash every couple of years or so. A pressure washer will remove any grime, paint spills or other disasters on your deck allowing you to re-coat it with a weather seal for the season.

 

Roofs and Gutters

 

These washers make cleaning out your gutters a piece of cake. Rather than climbing up on a ladder and washing out your gutters by hand, climb up on the ladder and blow them out with a pressure washer. Dirt, leaves and other debris will go flying! Be sure to aim the nozzle into your down-spouts as well to wash away any debris clogging up the pipes. Washing off your roof will remove any leaves or debris stuck under your shingles; just be careful you wash downwards and not upwards so you don’t blow off any shingles.

 

Vehicles

 

Cars, trucks, ATVs, motorcycles, trailers and boats all do well with a good power wash now and again, particularly the undercarriage and tires of these vehicles. Be sure to keep the nozzle moving rather than staying in one spot so you don’t damage your paint job.

 

These high pressure sewer jetting truck have a great number of uses. They are durable and use less water than a garden hose trying to do the same job. A word to the wise: if you have any loose paint, shingles, concrete, etc., it will be blown away with the debris. These cleaners should be used with caution on any surface that isn’t in tip-top shape! If you need help, though, in removing paint, graffiti or even loosening up pavers or shingles, a high pressure washer can be a lifesaver! Know more visit:isuzutruckscn.

Isuzu hydraulic beam lifter articulated basket platform

Posted on by

4x2 6wheels 19m Isuzu Aerial work platform truck with working cage manufacturer

Isuzu hydraulic beam lifter articulated basket platform,Japanese Isuzu Articulated basket platform (also called hydraulic beam lifter, articulated basket platform, basket crane truck, boomlift truck, aerial working truck, bucket lift truck, hydraulic aerial cage, overhead working truck, aerial boomlift) is ideal for maintenance of traffic lights, street lights, landscaping trees, cleaning/setting signboard and other high aerial works.
Features:
—- The working cage can be made of steel structure or reinforced fiberglass.
—- ISUZU chassis ensures perfect driving performance.
—- ISUZU engine, super powerful; reliable performance, no overhaul within 100,000 km.
—- Nice shape, rational structure.
—- Massive, durable, long service life.
Specification:

 

Articulated Basket Platform ISUZU (14-18M)
General  Vehicle Brand pst
Chassis Brand ISUZU
Overall Dimension 8315 * 2320 * 3500 mm
GVW / Kerb Weight 7,450 kg / 7,255 kg
Cab Cab Capacity 3 persons allowed
Air Conditioner W/ air conditioner
Engine Fuel Type Diesel
Engine Brand ISUZU engine, 4HK1
Power 190 Ps (140 KW)
Displacement 5193 ml
Emission Standard Euro IV
Chassis Drive Type 4X2, left hand drive
Transmission ISUZU gear box, no overhaul within 500,000km
Wheelbase/No. of axle 3815 mm / 2
Tyre Specification 8.25-16
Tyre Number 6 tyres and 1 spare tyre
Max Speed 95 km/h
Paint Metallic paint
Superstructure Working Cage 200 kg capacity, anti-slip floor
Working Height ≤18 M
Slewing 360° continuous rotation with base turntable
Control Control both on the ground and in the cage
Emergency electrical/manual pump is equipped to operate the equipment in case of engine failure.
Emergency stop switches at base and operator’s cage.
Optional **  Hoist hook with cables can be equipped for the function of a crane.
Hot sale products
 
Top ISUZU Special Truck Manufacturer in China
Mobile: +86 13677218585  Tel/Fax: +86 7223829200
Viber:+86 13677218585,  Whatsapp: +86 13677218585

 

ISUZU chassis bucket truck, overhead working truck

Posted on by

Chinese best supplier 14m Telescopic Bucket Truck Isuzu Lifting Equipment

ISUZU chassis bucket truck, overhead working truck, Aerial platform truck (also called truck mounted aerial work platform, aerial lift, hydraulic beam lifter, hydraulic aerial platform vehicle, aerial boom lift, bucket truck, overhead working truck, sky lift etc.) is ideal for maintenance of traffic lights, street lights, landscaping trees, cleaning/setting signboard and other high aerial works.

SPV aerial work platforms are available of 8m-12m, 14m-16m, 18m, 20m-22m, 24-26m. Insulated cage is optional.  

Features:
—- ISUZU chassis ensures perfect driving performance;
—- ISUZU engine, super powerful; reliable performance, no overhaul within 100,000 km;
—- The working cage can be made of steel structure or reinforced fiberglass (insulated cage);
—- Safty Devices are available, such as relief valves, balance valves, double-way hydraulic locks, motor emergency system etc;
—- Hoist hook with cables can be equipped for the function of a crane;
—- Cargo box is available to transport goods.  
Specification:

 

Aerial Platform Truck ISUZU (14-18M) 
General Vehicle Brand PST
Chassis Brand ISUZU
Overall Dimension 7650 x 1980 x 3100 mm
GVW / Kerb Weight 6,810 kg / 5,855 kg
Cab Cab Capacity 2+3 persons allowed
Air Conditioner With air conditioner
Engine Fuel Type Diesel
Engine Brand ISUZU engine, 4KH1-TCG40
Power 120Ps (88KW)
Displacement 2999 ml
Emission Standard Euro IV
Chassis Drive Type 4X2, left hand drive
Transmission ISUZU MSB transmission, 5-forward gears & 1 reverse, no overhaul within 500,000km
Wheelbase/No. of axle 3360 mm / 2
Tyre Specification 7.00-16 or 7.00R16
Tyre Number 6 tyres and 1 spare tyre
Max Speed 95 km/h
Paint Metallic paint
Superstructure Cage Rated Capacity 200 kg  
Working Height 14-16 M 
Outriggers 4pcs, H-type; Hydraulically extend and retract
Slewing 360° continuous rotation with base turntable
Control Control both on the ground and in the cage
Emergency electrical/manual pump is equipped to operate the equipment in case of engine failure. 
Emergency stop switches at base and operator’s cage. 
Optional Insulated cage; Cargo box; Hoist hook with cables can be equipped for the function of a crane.
Hot sale products
 
Top ISUZU Special Truck Manufacturer in China
Mobile: +86 13677218585  Tel/Fax: +86 7223829200
Viber:+86 13677218585,  Whatsapp: +86 13677218585

 

ISUZU bucket crane truck aerial platform vehicle

Posted on by

Asia 16m quality Isuzu Hydraulic Working Platform Vehicle

ISUZU bucket crane truck aerial platform vehicle, Isuzu 16m lift truck (also called articulated boom lift, aerial platform vehicle, basket crane truck, truck mounted aerial lift truck, hydraulic aerial platform, overhead working truck, aerial boomlift) is ideal for maintenance of traffic lights, street lights, landscaping trees, cleaning/setting signboard and other high aerial works.

Features:
—- The working cage can be made of steel structure or reinforced fiberglass.
—- ISUZU chassis ensures perfect driving performance.
—- ISUZU engine, super powerful; reliable performance, no overhaul within 100,000 km.
—- Nice shape, rational structure.
—- Massive, durable, long service life.
Specification:
Bucket Lift Truck ISUZU (8-14M)
General  Vehicle Brand PST
Chassis Brand ISUZU
Overall Dimension 7640 * 2000 * 3150 mm
GVW / Kerb Weight 6,800 kg / 5,275 kg
Cab Cab Capacity 2+3 persons allowed
Air Conditioner W/ air conditioner
Engine Fuel Type Diesel
Engine Brand ISUZU engine, 4HK1
Power 120 Ps (88 KW)
Displacement 5193 ml
Emission Standard Euro IV
Chassis Drive Type 4X2, left hand drive
Transmission ISUZU gear box, no overhaul within 500,000km
Wheelbase/No. of axle 3360 mm / 2
Tyre Specification 7.00-16
Tyre Number 6 tyres and 1 spare tyre
Max Speed 105 km/h
Paint Metallic paint
Superstructure Working Cage 200 kg capacity, anti-slip floor
Working Height ≤14 M
Slewing 360° continuous rotation with base turntable
Control Control both on the ground and in the cage
Emergency electrical/manual pump is equipped to operate the equipment in case of engine failure.
Emergency stop switches at base and operator’s cage.
Optional **  Hoist hook with cables can be equipped for the function of a crane.

 

Hot sale products
 
Top ISUZU Special Truck Manufacturer in China
Mobile: +86 13677218585  Tel/Fax: +86 7223829200
Viber:+86 13677218585,  Whatsapp: +86 13677218585
1 2 3