Aerial Bucket Truck Isuzu NKR

Manlift truck ISUZU also called Aerial platform truck, articulated boom lift, Aerial Bucket Truck Isuzu NKR, Chassis parameters of ISUZU 14m aerial work platform truck: ISUZU NKR 4x2 left hand drive double row cab chassis, condition new, 2+3 seats, 3360mm wheelbase, ISUZU 4KH1CN model 120HP Euro 5/6 dieseI engine, turbocharged and intercooling, ISUZU MSB 5-speed transmission, 7.00R16 radial tires, 6+1 pcs with one spare tire, ISUZU 2.5 ton front axle, ISUZU 4.8 ton rear axle, air brake, power assist steering, with air conditioning, AM/FM radio system, etc. So also can be called as truck mounted aerial platform, aerial work platform, hydraulic beam lifter, bucket truck, bucket boom truck, truck mounted crane, truck mounted aerial lift, telescopic platform truck, aerial working platform, truck mounted aerial working platform.

Main Component for 14m Aerial Bucket Truck Isuzu NKR from POWERSTAR:

Superstructure parameters of ISUZU 14m aerial work platform truck: Isuzu Aerial work trucks refer to special vehicles that transport people and equipment to the scene and perform aerial operations. It has straight telescopic arm aerial truck and knuckle arm aerial truck. 

/Articulated arm boom system, 3 section.

/Maximum working height 14 meters.

/Turntable 360° slewing.

/Basket 200kg load, size 1600x750x1140mm,  360° rotary. Customized insulated bucket

/Control operation: computer + manual control levers + wireless remote control box

/4 pcs hydraulic outriggers, optional H shape or X shape.

/Engineering rotary lights to warn people.

How to use the front 1000kg hoist hooker of the Aerial Bucket Truck Isuzu NKR from POWERSTAR:

Operators can take advantage of the boom arm to lift materials. Crane has a load table, the rated lifting capacity for Isuzu aerial platform trucks from POWERSTAR TRUCKS INDUSTRY CO., LIMITED is 1000kg, which also called 1tons, 2200 pound.

Operator must memorize the amount of work lifting the truck for Lifting, you should know the hanging weight of the goods compared with the rated load when lifting goods, first it is lifted into place, then the percentage change in use to achieve the lower arm in place. At this point, the goods should not be hanging over the lower arm angle in this piece, the maximum permitted rated load.

 When using the crane from Isuzu NKR 14m manlifter truck must comply with the following regulations, such as failure to comply with these regulations will be the make operator and ground crew injury.

Ø  Lifting, lifting hoists are not allowed to exceed the rated load indicated in the table.

Ø  Weight lifting is not allowed to load unknown goods.

Ø  It will not allow pulling the side, except for what happened with the operator's side of the physical tension.

Ø  Operating vehicles are not allowed to use pole, pull cables, etc., should be special device to do this work.

Ø  Be sure to replace worn or damaged winch rope immediately

Ø  Mankind prohibited standing in the bucket when hoist hooker working.

Ø  The correct command is the basis for lifting should be planned and prepared.

Ø  To comply with the procedures provided in this manual to ensure the stability of operating vehicles.