Isuzu Truck Manuals

ISUZU 4000L vacuum suction truck is a vehicle specially used for cleaning and transporting sludge, cesspit, feces and liquid waste. which is widely used in urban sanitation, municipal construction and other fields. As international famous brand ISUZU, the Isuzu mini ELF 4000L sewer suction truck, which is a vehicle can load 4000 liters of sludge or liquid waste. The vacuum suction truck ISUZU uses the top brand vacuum pump, including Italy brand MORO pump, BP pump, JUROP pump, or Chinese brand WEILONG pump, YIFENG pump, the vacuum pump with negative pressure principle to suck sludge, feces and other waste into the on-board storage container through a specific device, thereby realizing the collection, transportation and discharge of waste.     The brand new ISUZU 4000L vacuum truck is widely export to Asia countries, including Philippines, Myanmar, Laos, Cambodia, etc. working principle of Isuzu cesspit emptier mainly based on vacuum negative pressure technology. When the suction truck starts working, the suction pump will generate negative pressure, so that the air in the suction pipe is sucked out to form a vacuum state. Since the suction pipe is always immersed in the liquid surface, the air in the manure tank becomes increasingly thinner after being sucked out because it cannot be replenished, causing the pressure in the tank to be lower than the atmospheric pressure. Under the action of atmospheric pressure, the manure enters the Isuzu vacuum tank through the manure suction hose. Alternatively, because the siphon is close to the bottom of the tank, the air is continuously discharged into the manure tank, and it is compressed because it has no way out, causing the pressure in the tank to be higher than the atmospheric pressure. Under the action of compressed air, the manure is discharged out of the tank through the siphon and manure suction hose. And below steps detailed showing how to use and operate the ISUZU 100P sewer tanker truck: POWERSTAR TRUCKS produced and export ISUZU vacuum trucks are mainly used for the suction, transportation and discharge of sludge, feces or sludge in petrochemical plant sewage pools in sewers, rainwater wells, inspection wells, septic tanks and various ditches. In addition, it can also be used to clean sediments in urban sewers and pipelines, as well as dredging dead corner mud ditches. ISUZU vacuum pumper trucks usually consists of oil-water separator, water-gas separator, special vacuum suction pump, including Italy brand MORO pump, BP pump, JUROP pump, or Chinese brand WEILONG pump, YIFENG pump,, volume pressure gauge, pipe network system, suction conduit, self-flow valve, vacuum tank, connecting vessel (stool window), full-automatic anti-overflow valve and hydraulic kit. These components work together to enable the suction truck to efficiently complete the collection, transportation and discharge of sewage. After the Isuzu 100P sewer tank truck export to Philippines Manila, when operator start using ISUZU 4000L vacuum suction truck, it is necessary to strictly follow the operating procedures to avoid improper operation causing equipment damage or personal injury.ISUZU NKR 4,000L Vacuum Tank Truck Operation Guidance1. Pull the brake, start the truck engine, press the clutch pedal, push down the PTO joystick, slowly release the pedal, then the PTO is start to make vacuum pump working.2. Keep the sewage tank rear cover closed, make sure the clam well locked; keep the discharge valve closed and suction valve open. 3. Pull out to start the Alarm Warning button;                        4. Connect the suction hose to the suction valve; then put another head of the suction pipe into the sewage pool   5. Adjust the four-way valve to suction position (RIGHT POSITION), carefully check the released air, the vacuum pump sound, the vacuum meter.6. Observe the sight glass on the back cover and the side of the tank. When hear the alarm sound, immediately adjust the four-way valve to the middle position to stop the pump from working.      Note: 1) Only suggest use vacuum pump for Pump-In working, strictly forbidden for Pump-Out working;         2) Strictly prohibit over suction, otherwise it may cause damage to the pump.7. Sewage discharging operation steps      Adjust four-way valve joystick to middle position, then open the discharging valve to open position, and discharge all the waste water by gravity, also can connect with pipeline for discharge. (Recommend)      Tank lifting and rear cover opening operation guidance:1.  Open the rear cover clamping device, loosen the handgrip and completely take off screw.2.  Adjust the rear cover manual operation joystick to open rear door, please be sure the inside and outside air pres...

Isuzu folding arm aerial work platform truck is a kind of equipment specially designed for high altitude aerial work, which combines the original ISUZU truck chassis technology of Isuzu automobile and the advantages of folding arm aerial work platform, and widely used in Africa market, including in Djibouti, Ethiopia, Congo DR, Mauritania, etc. The Isuzu folding arm aerial platform truck, also called Isuzu manlifter truck, Isuzu high altitude platform truck, Isuzu truck mounted man lift, Isuzu truck work platform, Isuzu articulating platform truck. Isuzu aerial platform is a special vehicle that adopts Isuzu light duty NKR NPR truck chassis and carries articulating aerial work platform. Mounted with compact structure, easy to transport and quick to set up. The folding arm design enables the work platform to operate flexibly above various obstacles. Equipped with advanced hydraulic transmission system to achieve rapid lifting and precise positioning. Below showing details of the ISUZU 19m folding arm aerial platform trucks export Djbouti: Isuzu folding arm aerial work truck is an efficient, safe and reliable high-altitude operation equipment with broad application prospects and market value. Below information detailed introduced the main configuration and functions of the original Japanese Isuzu technology truck mounted work platform, also guidance you how to use the Isuzu manlifter truck properly:   Chassis configuration: Isuzu manlifter usually use high-performance Isuzu NPR chassis, equipped with high-horsepower engines 4KH1CN model and engine power can be 120HP, 132HP, 140HP, etc. Emission can be EURO 6 standard with 2999cc. High-quality ISUZU brand transmissions MSB 5 shift or MLD 6 shift to ensure the stability and driving performance of the vehicle under various road conditions.Folding arm structure: The Isuzu NPR truck mounted folding arm aerial platform is made of high-strength steel plate and has a 360-degree full rotation function, which can achieve flexible operation. The arm is equipped with an auxiliary hook for convenient lifting operations.Working platform: The articulating working platform has a built-in combined leveling mechanism to ensure that the working bucket is always level. The rear-mounted design of the working bucket facilitates personnel entry and exit, while lowering the center of gravity of the vehicle and improving driving performance.Operating mechanism: The aerial platform operating mechanisms can be optionally equipped with an electronic control operating system, which is simple and convenient to operate. At the same time, the Isuzu truck mounted man lift is also equipped with safety devices such as manual emergency descent valves to ensure the safety of operators.   Isuzu truck mounted aerial platform are widely used in aerial operations in various systems such as municipal administration, electricity, street lights, advertising, communications, gardening, transportation, industry and mining, and docks. 1. Efficient and convenient: using advanced hydraulic transmission system, fast lifting speed, simple operation, can greatly improve the efficiency of high-altitude operations.2. Safe and reliable: Isuzu truck mounted articulating aerial platform equipped with a variety of safety devices, such as fall arresters, overload protection devices, etc., to ensure the safety of operators. At the same time, after strict quality testing and certification, the stability and reliability of the product are ensured.3. Wide range of applications: Isuzu truck manlifter can meet the needs of a variety of high-altitude operation scenarios, replace traditional manual climbing or use of scaffolding and other methods for high-altitude operations, and reduce the labor intensity and risks of operators.    

ISUZU 4000L tanker truck refers to an Isuzu sprinkler truck, Isuzu water tanker, which based on original Japanese ISUZU truck chassis, equipped with an ISUZU brand diesel engine 4KB1-TCG60 model,  maximum 132HP and emission 2499cc, the oval shape water tanker with customized capacity of loading 4,000 liters of water. ISUZU 4000L sprinkler truck is a powerful and well-equipped sprinkler equipment that plays an important role in maintaining the urban environment, protecting the road surface, and reducing air pollution. And this small type water bowser tanker truck is very popular in Mongolia market.   An Isuzu tanker truck is a motor vehicle designed to carry water or other liquid on roads.  The largest such vehicles are similar to railroad tank cars, which are also designed to carry liquid loads.  Many variants exist due to the wide variety of liquids that can be transported. Isuzu Tank trucks that uses an ISUZU brand engine, which is known for its reliability and efficiency. Also the designed capacity can load about 4,000 liters of water to meet the needs of sprinkling a large area. The tank body is generally made of high-strength materials, such as carbon steel plates, to ensure its durability and pressure-bearing capacity. The inside of the tank body may be treated with anti-corrosion to extend its service life. Anyway, to meet some customer special requirement, we POWERSTAR produced Isuzu water tanker can be mounted with PP material tanker, which is not rust, also can be used as food grade stainless steel 304-2B material for drinking water delivery.    ISUZU 4000L water bowser trucks are widely used in watering operations in urban roads, squares, parks, gardens and green spaces. They can not only reduce road temperature, prevent dust and reduce air pollution, but also be used for tasks such as green irrigation and emergency fire fighting.Spraying device: Isuzu sprinkler tanker truck is equipped with a variety of spraying devices, such as front flushing, rear sprinkling, side spraying, etc., to meet the needs of sprinkling in different occasions. Some models are also equipped with greening sprinkler cannons, which can realize the full rotation of water columns and the adjustment of various shapes (such as columnar, heavy rain, moderate rain, light rain, drizzle, mist, etc.), which is convenient for watering roadside flowers and trees or washing dust on trees.Water pump: Equipped with a self-priming sprinkler pump, it can quickly extract the water in the tank and spray it out. Some models are also equipped with debris filters to prevent the water pump from clogging.Power take-off: In order to drive equipment such as sprinkler pumps, sprinkler trucks are usually equipped with power take-offs.Music speakers: Some models are also equipped with music speakers, which can play music during watering operations to remind pedestrians and vehicles to avoid.Cab control: There are some high standard design for water trucks, which use air controller to be connect with all valves, which control switch in the cab to facilitate the driver to operate various spraying devices of the sprinkler truck. 1. When using an Isuzu water bowser tanker sprinkler truck, you should pay attention to safe driving and abide by traffic rules.2. Regularly check whether the various equipment of the tanker truck is working properly to ensure its stable and reliable performance.3. During the watering operation, the spraying device and the shape of the water column should be adjusted according to actual needs to achieve the best effect.  

Isuzu NPR truck mounted crane transporter, referred to an ISUZU truck mounted crane or ISUZU crane truck, which is a special vehicle that integrates lifting and transportation functions. Isuzu crane lorry usually uses hydraulic lifting and telescopic systems to achieve the lifting, rotation, and lifting of goods. These functions are completed by the crane (crane) installed on the chassis of the truck. Djibouti customer purchase ISUZU NPR truck mounted crane and mainly used for construction project in Djibouti Seaport, below showing how to use the Isuzu crane mounted dropside cargo body. The following is a detailed analysis of Isuzu NPR cargo crane truck: Chassis: Isuzu NPR truck chassis can be standard as 4x2 or customized offroad 4x4 model, which provides solid carrying capacity and good driving performance. The medium type series is the leader among Isuzu trucks and has won the trust of users around the world with its excellent performance and reliability.Cargo compartment: As needed, the Isuzu crane truck lorry equipped with full dropside cargo body for loading non-lifting items or as an auxiliary platform during lifting operations.Power take-off: The power take-off is a key component connecting the engine and the crane power system, responsible for providing power to the crane.Crane (crane): The POWERSTAR boom crane is the core component for realizing lifting operations, including telescopic arms, variable-length cylinders, winches, hooks and other components, which can complete the lifting, rotation, and lifting of goods. Isuzu NPR truck crane transporter is a special vehicle with powerful functions and excellent performance, which is widely used in various lifting and transportation operations. POWERSTAR produced and export Isuzu crane mounted cargo trucks with advanced features, mainly with below "VESA" feature: 1. Versatility: Isuzu NPR truck crane can be used for both cargo transportation and lifting operations, and is suitable for a variety of work scenarios.2. Efficiency: Through the hydraulic system and precise mechanical structure design, fast and accurate lifting operations are achieved, improving work efficiency.3. Stability: The Isuzu crane truck chassis and crane are reasonably designed to remain stable during the lifting process and ensure safe operation.4. Adaptability: According to different needs, chassis and crane configurations of different tonnages can be selected to meet various lifting and transportation needs.   Isuzu NPR truck cranes are widely used in stations, warehouses, docks, construction sites, field rescue and other places. They are indispensable and important equipment in urban construction, logistics transportation, emergency rescue and other fields. That is the reason ISUZU NPR crane trucks are popular and widely used in Asia, Africa, South America and Latin America, etc.When using Isuzu NPR truck cranes for lifting operations, you must strictly abide by the safety operating procedures to ensure the safety of personnel and equipment.Maintain the vehicle regularly and check whether the hydraulic system, mechanical parts, electrical system, etc. are working properly to extend the service life of the vehicle and improve work efficiency.When selecting and using a crane, it should be reasonably configured and selected according to specific needs and the operating environment to ensure the operating effect and safety.      

Isuzu 20m straight arm aerial work platform vehicle is a special vehicle designed for aerial work. Isuzu 20m manlifter truck is widely used in many fields such as construction, aviation, and electricity. In the field of construction, Isuzu straight aerial platform trucks can be used to install and repair lamps, air conditioners and other equipment in high-rise buildings; in scenes such as aviation ports or power line maintenance, Isuzu telescopic high altitude working platforms can also be competent for many difficult-to-reach high-altitude tasks. In addition, Isuzu manlifter trucks are also suitable for climbing and maintenance projects in many industries such as municipal construction and landscaping. Below pictures showing how to use the Isuzu manlifter trucks from us POWERSTAR:   As a powerful, stable, and flexible aerial work equipment, Isuzu 20m Aerial Platform Truck can meet a variety of aerial work needs and is one of the indispensable equipment in modern urban construction. Main technical parameters: including chassis model, length, width, height, wheelbase, engine emissions, etc. For example, a certain model may use the Original Japanese ISUZU truck chassis, with dimensions of 6500×2200×3250mm and a wheelbase of 3360mm, which meets the EURO 6 emission standards. Working height: The maximum working height can reach 20 meters, which can meet various high-altitude working needs. Working range: At the maximum working height, the working range may reach about 8.9 meters, ensuring that a wider area can be covered during high-altitude working. As the working famous aerial platform truck supplier, we POWERSTAR can customized to produce different type manlifters, all with below advanced features: Boom form: It adopts a four-section telescopic boom design, and the telescopic cylinder is built-in with a wire rope transmission, which is compact and stable. The boom material is mostly high-strength steel plate, such as HQ60/5mm, and the boom cross-section is usually diamond-shaped to enhance the force bearing capacity and structural strength. Outrigger type: front and rear H-shaped outriggers, good stability, the outrigger materials are mostly low-alloy steel such as Q345B/5mm, the outrigger span is large, and it can adapt to various working conditions and ground conditions. Rotation system: It has a two-way 360° continuous rotation function, adopts an advanced planetary gear reduction mechanism, has self-lubrication and self-locking functions, and improves working efficiency and safety.   Isuzu 20m straight high altitude aerial platform truck is a powerful, stable and flexible aerial work equipment that can meet a variety of aerial work needs and is one of the indispensable equipment in modern urban construction.Lifting platform: Provide a stable lifting platform to ensure that workers can work safely and efficiently when working at high altitudes. The platform also equipped with a static hydraulic automatic leveling system to ensure stability during operation. Also can be equipped with insulated basket for electric workingOperating system: Supports manual and electric combined operation, electro-hydraulic proportional speed regulation, and flexible and convenient operation. The boom movement and hanging basket control may adopt a two-position operation design with a controller and display screen to improve operation accuracy and safety.Safety protection: Equipped with multiple safety protection functions, such as leg locking, automatic working range limitation, etc., to ensure the safety of personnel and equipment during operation.Remote control operation: The basket also adopt unlimited remote control operation to improve the convenience and flexibility of operation. Standard English language, also can be customzied as French, Russia, Arabic, Spanish, etc.  

The Isuzu 700P 9000L potable water truck also called Isuzu 700P 9cbm drinking water tank truck,Isuzu 700P potable water bowser truck,is a truck designed specifically for drinking water transportation. With its excellent performance and careful design, the Isuzu 700P 9000L potable water truck has become a highly anticipated choice in the industry. This model combines efficient performance, reliable stability and excellent adaptability, providing users with a professional and reliable drinking water transportation solution. ★ In terms of appearance, the Isuzu 700P 9cbm drinking water truck shows a modern and professional image, with a simple and elegant design and smooth lines. It exudes the breath of quality and strength from any angle. The exterior design not only focuses on practicality, but also on beauty, making it stand out in the field of professional transportation.   ★ In terms of performance, the model is equipped with a powerful and efficient engine, ensuring excellent power output and smoothness of high-speed transportation. Its sturdy and durable chassis structure and excellent carrying capacity enable it to easily cope with various road conditions and load requirements, ensuring safety and stability during transportation. The advanced suspension system and stability control technology further enhance the performance of the vehicle, bringing drivers a more comfortable and safe driving experience.   ★ As a vehicle dedicated to drinking water transportation, the Isuzu 700P 9000 liters potable water bowser, is equipped with a large-capacity water storage tank and an efficient water delivery system, which can efficiently complete the loading and unloading of drinking water, improve the loading and unloading speed, and ensure the demand for rapid water supply. This efficient water transportation system makes it an ideal choice for large-scale drinking water demand occasions, providing users with a convenient and reliable drinking water supply solution.     ★ This drinking water bowser combines modern technology and high-quality materials, and ensures that each vehicle meets the highest standards through precise manufacturing processes and strict quality control. Its design takes into account the needs of users, and it has been carefully polished from production and manufacturing to actual operation to ensure that the user experience is maximized.   ★ Its large-capacity water storage tank designed specifically for drinking water transportation has a leak-proof design to ensure that the water source is pure and uncontaminated, and meets the drinking water hygiene standards. The equipped efficient water delivery system can quickly and stably load and unload water sources, improve transportation efficiency, and adapt to various emergency and regular water supply needs.   ★ In terms of safety, this vehicle is equipped with advanced safety systems, including anti-lock braking system (ABS), vehicle stability control system (VSC) and hill start assist system (HSA), providing all-round driving safety protection, so that both the driver and the vehicle can reach the destination safely.   ★ As the demand for drinking water gradually increases, the transportation industry has a growing demand for efficient and reliable transportation tools. The Isuzu 700P 9cbm drinking water bowser has become one of the best choices to meet this demand with its excellent performance, stability and features designed specifically for drinking water transportation. Its professional manufacturing level and excellent performance give it a unique competitive advantage in the market and are widely recognized and trusted by users.   The following is the user's manual of Isuzu 700P 9000L potable water truck,you can download the full version at the beginning of this article.

Isuzu KV600 water tanker truck also called Isuzu KV600 sprinkler,Isuzu water spraying truck,which plays an important role in urban sanitation and greening operations, and is an indispensable and important equipment in urban sanitation and greening operations. The following is a detailed description of Isuzu KV600 water tanker truck's features: Appearance design Isuzu KV600 sprinkler inherits the consistent stable and majestic style of the Isuzu brand. The front face design is simple but powerful, and the body lines are smooth, which not only shows modern aesthetics, but also ensures the durability of the vehicle. Its wide-body cab design not only provides spacious driving space, but also enhances driving comfort, allowing the driver to maintain a good working condition during long-term operations.   Power performance In terms of power, the Isuzu KV600 water sprinkler truck is equipped with Isuzu's advanced diesel engine, which is known for its high efficiency, reliability and economy. It can provide sufficient power support for the sprinkler to ensure stable operation under various road conditions and meet the needs of urban sanitation and greening operations. At the same time, the matching transmission system has also been carefully adjusted, with smooth gear shifting and high power transmission efficiency, which further improves the vehicle's operating efficiency.   Sprinkler system The sprinkler system is the core part of the sprinkler truck. The Isuzu KV600 water spraying truck is equipped with an efficient and stable sprinkler device. The device can accurately control the amount of water and the spraying range, and can easily cope with road cleaning, greening irrigation, dust removal and cooling. In addition, its water tank has a large capacity, and one water tank can meet the operation needs for a long time, reducing the number of frequent water additions and improving work efficiency.   Scope of application The Isuzu KV600 sprinkler truck is suitable for use in various urban environments due to its excellent performance and stable quality. Whether it is a bustling and noisy urban center or a quiet and livable suburban town, it can be seen. It can not only meet the basic needs of urban road cleaning and greening irrigation, but also perform emergency dust removal and cooling operations under special circumstances, contributing to the cleanliness and beauty of the city.   The following is the user's manual of Isuzu KV600 water tanker truck,you can download the full version at the beginning of this article.

Isuzu 600P water tanker truck also called Isuzu 600P sprinkler truck,is a versatile commercial vehicle designed for transporting and spraying water. This model has important uses in urban environments and is often used for road cleaning, greening maintenance, sewer unblocking, fire extinguishing and dust control. Its efficient working performance and wide range of applications make it an indispensable special vehicle for sanitation, municipal administration, gardening and other departments.   Isuzu 600P water tanker trucks are known for their excellent durability and efficient working performance. The vehicle uses Isuzu's advanced chassis technology and an optimized body design, which not only ensures the stability and reliability of the vehicle, but also improves its operating efficiency and flexibility. In the market, Isuzu 600P sprinkler trucks are highly favored for their high cost performance and wide applicability. Technical features: Powerful power: The Isuzu 600P water spraying truck is equipped with a high-performance Isuzu diesel engine, which has ample power and can meet operating needs under various complex working conditions. Its engine technology is mature and reliable, ensuring long-term and stable operation of the vehicle.   Moderate capacity: According to different configurations and customer needs, the water tank volume of the Isuzu 600P water tanker truck can be flexibly adjusted. This design not only ensures the flexibility of the vehicle, but also takes into account the coverage and efficiency of the sprinkler operation.   Efficient spraying system: The vehicle is equipped with an advanced spraying system that can adjust the spraying angle and flow rate as needed to achieve precise watering. At the same time, its spraying range is wide and the range is long, which can meet the watering needs of different places.   Easy operation: Isuzu 600P sprinkler truck adopts humanized design, reasonable cab layout and easy operation. The driver can easily master various operating functions of the vehicle and improve work efficiency.   The Isuzu 600P sprinkler truck is a powerful, multi-purpose professional vehicle that provides important support for urban management and engineering construction. Its efficient spray system, reliable performance and comfortable driving experience make it the vehicle of choice in many industries, demonstrating excellent reliability and practicality.   The following is the user's manual of Isuzu 600P water tanker truck,you can download the full version at the beginning of this article.