How to use Isuzu truck

The Isuzu 100P vacuum truck is a powerful and efficient vehicle designed for cleaning and maintaining sewage systems and septic tanks. Operating this  Isuzu Vacuum truck requires careful attention to detail and proper understanding of its functions. Here is a step-by-step guide on how to operate the Isuzu 100P vacuum truck

Step 1: Start the engine
- Insert the key into the ignition and turn it clockwise to start the engine.
- Allow the engine to warm up for a few minutes before operating the vacuum truck.

Step 2: Engage the vacuum system
- Locate the vacuum pump control panel on the dashboard.
- Turn on the vacuum pump by flipping the switch to the "on" position.
- Adjust the vacuum pressure as needed using the control knob on the panel.

Step 3: Begin suctioning waste
- Position the vacuum hose over the waste material that needs to be suctioned.
- Use the joystick control to maneuver the vacuum hose and control the suctioning process.
- Monitor the waste tank level gauge to ensure it does not exceed the maximum capacity.

Step 4: Empty the waste tank
- Once the waste tank is full, park the vacuum truck in a safe and level area.
- Turn off the vacuum pump and engage the tank draining system.
- Use the provided hose to empty the waste tank into a designated disposal area.