Knowledge

Isuzu fire truck, also known as Isuzu fire extinguishing  truck, Isuzu fire fighting  truck, Isuzu fire rescue  truck, Isuzu fire tender,and Isuzu fire engine. It is a vehicle specifically designed for firefighting or other emergency rescue purposes.   To use the Isuzu fire truck, it is necessary to follow the relevant fire rescue procedures and technical requirements. The following are the steps for using the Isuzu fire truck: Isuzu fire truck is conducting a spraying drill   Isuzu fire truck in our plant.   1.After receiving a fire alarm or other fire rescue request, firefighters quickly dispatch firefighting vehicles. 2. After entering the fire scene, firefighting trucks should stop at the designated location by the fire scene commander. The parking posture of the vehicle can meet the needs of attacking and retreating from the fire scene, and must ensure flexible and flexible withdrawal from dangerous positions at any time. The engine of the vehicle must be kept running and must not be blindly turned off, which may cause damage to the aircraft.   Isuzu fire fighting truck in our plant. Isuzu 4x2 fire truck for exporting.   3.Deploy isuzu fire trucks, select suitable water spraying methods based on the severity of the fire and the fire environment, turn on the water pump, and use the water spraying system on the fire truck for firefighting operations. Specifically, as follows: When using the water in the fire truck water tank (box), the handle of the water outlet butterfly valve can be pushed towards the direction of the fire pump shaft to pull the pin out of the pin hole, pull the handle to the horizontal position, open the butterfly valve, and water flows into the pump from the water tank (box). When using water from the fire hydrant, connect the suction pipe to the fire hydrant, and the water flows into the pump from the fire hydrant. When using water from ponds, rivers, or deep wells, connect each suction pipe (note: sealing gasket for each connection pipe) and connect the water filter to sink into the water (note: the distance to sink into the water source is about 0.5 meters from the upper end face of the water filter to the water surface. If it is too shallow, it will generate vortices during suction, affecting the flow rate. At the same time, it should not touch the bottom of the water to prevent suction of sludge and debris, which may cause blockage of the suction pipeline and damage to the fire pump). Start the fire pump, press the water diverter button to start the water diverter, and adjust the manual oil valve to rotate at a speed of around 2200r/min-2500r/min. Within 30 seconds, water will be introduced into the fire pump. When the water is introduced, the water diverter will automatically stop working. At this time, the water diverter button should be immediately reset to avoid burning the water diverter due to prolonged operation. Low pressure working condition usage Wh...

Isuzu 700P refuse compactor truck (QL1110ANKAY) is a special vehicle specially designed for compressing and collecting garbage, playing a key role in urban sanitation work. The Isuzu 700P refuse compactor truck uses a high-pressure hydraulic system to compress garbage into a smaller volume, thereby reducing the volume of garbage, improving transportation efficiency, and saving transportation costs. Isuzu 700P refuse compactor truck is usually widely used in urban and industrial areas to help managers deal with garbage problems more effectively. This article will introduce in detail the advantages of Isuzu 700P refuse compactor truck (QL1110ANKAY).     ISUZU 4x2 190hp 10cbm compressor garbage truck parameters for reference Chassis Chassis model number ISUZU 700P chassis(QL1110ANKAY) Cabin Brand: ISUZU   700P single cabin, 4x2 left hand drive   3 seats, with air conditioner, USB connector radio  Vehicle Main Dimensions Overall dimensions (L x W x H) mm:8600X2500X2850mm   Wheel base:3815 (mm)   Overhang (front/rear): 1110/2055 (mm)   Approach angle:20°   Departure angle:19° Weight in KGS Curb Weight：6000kg Max. driving speed(km/h) 110  Engine Brand ISUZU   Model 4HK1 , EURO 6   Emission 5193 ml   Type 4-stroke direct injection,4-cylinder in-line with water cooling, turbo-charging and inter-cooling   Horse Power(HP) 190HP Gearbox ISUZU MLD, 6 Forwards gear & 1 reverse gear Tire 235/75R17.5, 6 pcs+1 spare tire Axle Front axles 4t, rear axle 7t Garbage box parameters Volume 10 m3 Material Carbon steel and high tensile steel Standard equipment 1. Dustbin volume:8 m³ 2. hydraulic control device   Compared with traditional garbage trucks, Isuzu garbage compactor truck has many advantages in garbage disposal. This article will analyze the advantages of Isuzu garbage compactor truck from the following five aspects. 1: Improve garbage disposal efficiency Isuzu garbage compactor truck (QL1110ANKAY) can compress garbage in real time through its built-in compression device, effectively reducing the volume of garbage. In this way, the garbage truck can load more garbage during transportation, thereby reducing the number of round trips and improving transportation efficiency. Compared with traditional garbage trucks, the Isuzu garbage compactor truck can handle more garbage in the same time, saving manpower and time costs.   2: Reduce transportation costs Since the Isuzu waste compactor truck can compress the garbage, the volume of the garbage is reduced under the same loading capacity, which can reduce the number of vehicles and transportation costs. By reducing transportation costs, city management departments can more effectively plan the overall cost of waste disposal and optimize the waste disposal process, bringing better economic benefits. 3: Improve environmental performance During the process of loading and transpo...

Isuzu fire truck, also known as Isuzu fire extinguishing truck Isuzu fire fighting truck, Isuzu fire rescue vehicle, isuzu fire engine,and Isuzu sprinkler fire truck; It is widely used in various disaster relief and rescue scenarios. Powerstar is a well-known and powerful specialized vehicle production brand, and our fire trucks can be exported to any country. Powerstar's isuzu fire truck have introduced the technology of Isuzu from Japan, with excellent chassis performance, powerful engines, trustworthy, simple operation, and easy maintenance. Isuzu ELF water fire engine truck 5000L.   The body of a Isuzu fire truck is usually composed of a crane, truck chassis, and a box. The crane is used for loading and unloading fire extinguishing tools and equipment. The truck chassis provides driving power and load-bearing capacity, and the box is equipped with a pump system, water tank, spraying system, fire extinguishing equipment, etc. The engine is the core component of a isuzu fire truck, usually powered by an internal combustion engine, such as a diesel or gasoline engine, to drive the vehicle. The pump system pumps water to the fire truck and outputs it through pipelines and spraying systems. The water tank is used to store the fire extinguishing water source, and the spraying system sprays the fire extinguishing water source to the fire source. Fire extinguishing equipment is usually stored in the compartment, including fire extinguishers, protective clothing, fire shovel, fire axes, etc.   Isuzu Giga fire truck in our plant. The Isuzu 4x2  GIGA fire engine for export.   The following is the structure of Isuzu fire truck: 1.Vehicle Chassis: The chassis is the skeleton of the entire vehicle, providing structural support and power transmission. The chassis of Isuzu fire trucks usually has strong load-bearing capacity and stability to meet the needs of firefighting operations. 2. Vehicle Body: The body is the external part of a fire truck, including the carriage and hopper, used to load firefighters and equipment. Usually composed of materials such as steel plates, aluminum alloys, or ABS sheets, it has fire resistance, corrosion resistance, and seismic resistance to ensure effective use in emergency situations. The body design of Isuzu fire trucks usually considers compactness, operability, and fire performance. 3. Power system: Usually diesel engines are used, and some Isuzu fire trucks are equipped with a turbocharging system to increase power output. 4 water tanks and pumps: Isuzu fire trucks usually have a water tank and pump system for storing and transporting firefighting water. The capacity of the water tank and the performance of the pump directly affect the fire extinguishing efficiency of the fire truck. 5. Lighting and warning equipment:Isuzu fire trucks are usually equipped with lights and warning devices to provide light signals, illuminate the work site, and warn other vehicles and pedestrian...

Isuzu fire truck, also known as: Isuzu fire fighting lorry, Isuzu fire vehicle, Isuzu fire rescue van, Isuzu fire water truck，fire water tanker truck , is a special vehicle used for fire extinguishing and rescue.   The Isuzu fire truck is modified from the chassis of a Class II truck. The dedicated part consists of a liquid tank, a pump room, an equipment box, a power output and transmission system, a pipeline system, an electrical system, etc. The Isuzu fire truck is widely used in buildings and vehicles in urban areas. , commercial district buildings, factories, warehouses, airports and ports, transportation sites, rural areas; the Isuzu fire truck can quickly approach the fire scene to start fire-fighting battles and put out various fires. It is an ideal fire-fighting equipment.   Isuzu Giga fire fighting truck in our plant. Isuzu 4x2 fire truck for exporting. Isuzu fire trucks can be divided into the following types according to tonnage:   1. Small isuzu fire truck(1~3 tons): Generally used for narrow roads and small-scale building fires in urban areas, carrying limited water and fire-extinguishing equipment for initial fire extinguishing. 2. Medium isuzu fire truck (4~8 tons): suitable for medium-sized fires, equipped with larger water tanks and pump systems and basic fire extinguishing equipment. 3. Large isuzu fire truck (9 tons and above): used for large-scale fires in large buildings, chemical plants, etc., and can carry large amounts of water sources, foam agents and other fire-extinguishing equipment to extinguish and extinguish fires.   The isuzu fire trucks of different tonnage will have different fire extinguishing capabilities, carrying equipment and applicable scenarios. The appropriate type can be selected according to specific usage needs to deal with fire disasters of different sizes. Isuzu fire fighting truck in our plant. Isuzu water fire trucks for exporting. According to the nature of fire extinguishing, Isuzu fire trucks can be divided into the following types:   1.isuzu fire water tanker truck: Usually equipped with a large-capacity water tank and pump system, used for transportation and water supply to extinguish fires. 2. Isuzu foam fire truck: equipped with foam generator and foam liquid storage equipment, used to extinguish chemical and oil fires. 3. Isuzu rescue fire truck: It combines firefighting and rescue functions and is equipped with rescue equipment, such as cutting tools, lifeline ropes, etc., for emergency rescue missions. 4. Isuzu special fire truck: special fire trucks designed according to specific needs, such as chemical firefighting trucks, air rescue vehicles, etc.   The above are the common types of Isuzu fire trucks. Each type has different configurations and functions to meet the needs of various fire extinguishing and rescue tasks.   Isuzu Giga fire fighting truck in our plant. Isuzu Giga water fire trucks  for exporting. Isuzu Giga water ...

Isuzu fire truck is one of the important equipment for disaster relief and rescue. Isuzu fire truck is a special vehicle specially used for fire rescue work. It is usually equipped with various fire extinguishing equipment, rescue equipment and medical equipment. Isuzu fire truck plays an important role in various fires, accidents and other emergency situations. The sandwich PTO is one of the indispensable and important components of the Isuzu fire truck. It plays the role of connecting the fire truck power system and the water pump, and is the key to the normal operation of the Isuzu fire truck. Sandwich PTO plays a very important role in fire rescue work. Let’s take a closer look at the sandwich PTO of Isuzu fire truck. 1. The role of sandwich PTO in Isuzu fire truck Sandwich PTO is a device that transmits power to the water pump by connecting the engine and water pump. On Isuzu fire truck, the sandwich PTO plays the role of converting engine power into the power required for water pump operation. The water pump on an Isuzu fire truck usually requires a lot of power to operate, and the role of the sandwich PTO is to convert the energy output by the engine into the energy required for the water pump to work. Therefore, the sandwich PTO can be said to be the "heart" of the fire truck and the key to the normal operation of the Isuzu fire truck.   2. The structure of Isuzu fire truck sandwich PTO Sandwich PTO usually consists of clutch, connecting shaft, sandwich mechanism and other parts. The clutch is a key component connecting the engine and the sandwich PTO. When the Isuzu fire truck needs to use the water pump, the clutch causes the sandwich PTO to start working by depressing the foot pedal; the connecting shaft is the component that carries the power transmission and transmits the power of the engine to the sandwich PTO; and The sandwich mechanism transmits power to the water pump to ensure the normal operation of the water pump. 3. Working principle of Isuzu fire truck sandwich PTO The working principle of the sandwich PTO is actually very simple. When the Isuzu fire truck needs to use the water pump, the firefighter will step on the clutch pedal, and the clutch will transmit the power output from the engine to the sandwich PTO. The sandwich PTO transmits power to the sandwich mechanism through the connecting shaft, and the sandwich mechanism transmits the power to the water pump to ensure the normal operation of the water pump. When the Isuzu fire truck does not need to use the water pump, the firefighters can release the clutch and stop the work of the sandwich PTO.   4. Maintenance of Isuzu fire truck sandwich PTO As an important component of Isuzu fire truck, sandwich PTO requires regular maintenance to ensure its normal operation. First of all, it is necessary to regularly check whether the connecting parts of the sandwich PTO are loose to prevent the engine power from being transmitted to the water pump; secondly, it is...

The Isuzu Giga Fire Truck is also called the "Isuzu Giga Rescue Vehicle" or "Isuzu Giga Fire Fighting Truck".  These firefighting vehicles are specially designed for fire fighting and other emergency rescue missions.  Isuzu Giga fire trucks are usually equipped with professional firefighting equipment, such as water pumps, water tanks, sprinkler systems, fire extinguishing appliances and other necessary equipment to support firefighters in rescue missions.   These vehicles provide powerful power and flexibility in the firefighting field to help handle various firefighting challenges.  Isuzu GiGa fire trucks are generally known for their reliability, durability and professionalism, ensuring consistently effective operation in emergency situations. They are often used in urban, rural and industrial areas to provide the necessary support and assurance for fire emergency response.   Isuzu fire trucks are widely used in many industries and usually have the following functions and uses:   1. Fire-fighting capabilities: Fire trucks are equipped with professional equipment such as water pumps, water tanks, and sprinkler systems, which can provide a large amount of water for fire-fighting work. These vehicles can quickly respond to fire scenes, extinguish fires and control the spread of fires. 2. Rescue missions: In addition to extinguishing fires, Isuzu fire trucks are also used to perform various rescue missions, such as rescuing trapped people, handling traffic accidents, pumping water and draining water, etc. 3. Equipment storage: Fire trucks are usually equipped with space to store various firefighting and rescue tools, such as fire extinguishing equipment, lifesaving ropes, life vests, first aid equipment, etc., to provide support for various emergency situations. 4. Personnel transportation: Fire trucks can often transport firefighters to disaster scenes and provide them with a safe working space and the tools they need.       The Isuzu Giga fire truck is a fire-fighting vehicle specially designed for fire rescue missions. It has the following advantages:   1. Reliability and durability: Isuzu vehicles are famous for their reliability, and Giga fire trucks are also manufactured to meet high standards to ensure stable operation in emergencies. 2. Professional design: Fire trucks are usually specially designed to meet fire protection needs, including water pumps, water storage tanks, sprinkler systems, etc. Isuzu giga fire trucks also have these characteristics to ensure they play the best role in fire rescue. 3. Powerful power: Isuzu giga fire trucks may be equipped with powerful engines to ensure sufficient power during fire rescue missions. 4. Adaptability: Isuzu Juka fire trucks may have a smaller turning radius for easier operation on busy city streets, thereby improving mobility in urban environments. 5. Environmental performance: Fire trucks usually need to meet certain emission standards. Isuz...

Isuzu 100P waste compactor truck is a special vehicle designed to compress and collect garbage. It plays an important role in urban cleaning and environmental protection work. They can help city management departments collect and process garbage more efficiently and reduce environmental pollution. and waste disposal costs. The main function of Isuzu 100P waste compactor truck(QL104A6HAY) is to compress a large amount of garbage well and reduce the volume of garbage, thereby improving transportation efficiency and saving space. Isuzu 100P waste compactor truck is usually equipped with a compression device and a dustbin, which can effectively compress the waste into small pieces, making it easier to transport and handle.     ISUZU 4x2 98hp 5cbm waste compactor truck parameters for reference Chassis Chassis model number ISUZU 100P chassis(QL104A6HAY) Cabin Brand: ISUZU   100P single cabin, 4x2 left hand drive   2 seats, with air conditioner, USB connector radio  Vehicle Main Dimensions Overall dimensions (L x W x H) mm: 6190*1880*2320 mm   Wheel base: 3360 (mm)   Overhang (front/rear): 1015/1525 (mm)   Approach angle: 24°   Departure angle: 16° Weight in KGS Curb Weight:4210 kg   Payload: 3-5tons   Max. driving speed(km/h) 90  Engine Brand ISUZU   Model 4KH1 , EURO 5   Emission 2771 ml   Type 4-stroke direct injection,4-cylinder in-line with water cooling, turbo-charging and inter-cooling   Horse Power(HP) 98HP Gearbox ISUZU MSB, 5 Forwards gear & 1 reverse gear Tire 7.00R16, 6 pcs+1 spare tire Axle Front axles 2~2.5t, rear axle 3~4.8t Garbage box parameters Volume 5 m3 Material Carbon steel and high tensile steel Standard equipment 1. Dustbin volume: 5m³ 2. hydraulic control device   1.The hydraulic system of Isuzu 100P waste compactor truck(QL104A6HAY) is mainly composed of hydraulic pump, hydraulic cylinder, hydraulic pipeline, control valve and fuel tank. Here's how it works: Hydraulic pump: Converts mechanical energy into hydraulic energy by sucking in hydraulic oil from the tank and inputting it into the hydraulic cylinder. Hydraulic cylinder: Convert hydraulic energy into mechanical energy, and use the pressure of hydraulic oil to drive the piston to move along the track in the cylinder barrel, thereby compressing the garbage. Hydraulic pipeline: transfers the hydraulic oil output from the hydraulic pump to the hydraulic cylinder, and transfers the compressed waste to the corresponding location. Control valve: used to control the flow direction and flow rate of hydraulic oil in the hydraulic system to control the hydraulic cylinder. Oil tank: stores hydraulic oil and keeps it under certain temperature and pressure conditions to ensure the normal operation of the hydraulic system.   Through the synergy of these component...

The importance of correct operating procedures for Isuzu truck with crane cannot be underestimated. As a kind of heavy equipment, the operation of Isuzu truck with crane is not only related to work efficiency, but also to personal safety and property safety. Compliance with correct operating procedures can ensure the smooth progress of lifting tasks and reduce the risk of accidents. Correct operating procedures can improve the efficiency of Isuzu truck with crane. Accurate operating methods can save time and power consumption, improve operating efficiency during hoisting operations, and ensure timely loading and unloading of goods, which is particularly important for the logistics industry. Reasonable operating procedures can reduce duplication of work and incorrect operations, help establish good communication between truck drivers and guides, and improve operating efficiency.   Isuzu truck with crane operation steps: 1. Observe the operating environment of the Isuzu truck with crane, select a suitable angle for lifting operations, ensure there is enough space for the left and right outriggers to be fully opened, and park the truck at a suitable distance from the cargo according to the weight of the cargo. 2. Start the Isuzu truck with crane, hang up the power take-off, and put the power take-off in working condition. The specific operation is to step on the clutch, put the transmission handle in the neutral position, start the car, and observe the air pressure value when it reaches 0.5-.06Mpa. , pull out the manual air valve of the power take-off, and slowly release the clutch. At this time, the clutch is in working condition. 3. Only after completing the pre-operation inspection of the Isuzu truck with crane can the crane be used to operate the outriggers and boom. 4. Move the selector valve to the outrigger position on the sign, operate the outrigger, open the movable outrigger locking device, and extend the left and right horizontal outriggers and the left and right vertical outrigger cylinders according to the corresponding marks on the operating lever to ensure that the outriggers are Fully extended to support crane. 5. After the outrigger cylinder supports the crane, move the selector valve to the crane position on the sign, and use the crane to perform hoisting operations.   Isuzu truck with crane operating precautions: A. Precautions during operation: 1. Before using the crane, you need to ensure that the outrigger cylinders are fully opened and the outriggers are locked. The outrigger cylinders are on the ground and the car cannot be suspended in the air. All wheels of the car must be on the ground. 2. Before turning on the power take-off, check whether the control handle is in the neutral position. If the handle is not in the neutral position, return it to the neutral position. 3. Check whether the stop valve on the hydraulic tank is open. If not, be sure to open it and check the amount of oil in the tank. The oil level must...

Correct operation of the Isuzu Cargo Crane Truck is crucial because it is directly related to the safety and performance of the vehicle, greatly improving the service life of the truck-mounted crane and reducing the failure rate and maintenance costs. Operators should be familiar with the user manual and safe operating procedures to ensure that staff fully understand the functions and operating requirements of the equipment. It can also maximize the working efficiency and production capacity of the Isuzu Cargo Crane Truck. Operators should master appropriate operating skills and methods to ensure efficient and smooth loading and unloading processes. In addition, correct operation can reduce the risk of accidents and casualties and ensure workplace safety. Operators should remain vigilant at all times and comply with safety regulations and operating requirements. A. Inspection before lifting operations: 1. Check the oil level in the hydraulic tank. 2. Before starting the power take-off device, check whether each operating lever is in the neutral position. B. General precautions during lifting operations: 1. Carry out lifting operations within the rated lifting range. 2. Concentrate during operation and observe the surrounding situation to avoid accidents. 3. Pay attention to the temperature of the hydraulic oil. When the temperature exceeds 80°C, the lifting operation should be stopped. 4. When the wind speed exceeds 138m/s (level 6 wind), no lifting operations are allowed. 5. When lifting heavy objects, it is strictly prohibited to adjust the outriggers. When adjustment is needed, the heavy objects should be put down and the boom should be retracted. 6. When hoisting, it is strictly forbidden for the two mechanisms to operate at the same time. 7. It is not allowed to lift heavy objects buried underground or frozen on the ground, and it is not allowed to pull heavy objects diagonally. 8. Before starting the operation, use the hand brake to stop the truck. 9. It is strictly forbidden to stand under the boom before operation. 10. The tire pressure meets the regulations, 441kPa for the front wheel and 617kPa for the rear wheel. C. Determination of rated load: 1. According to the length of the boom and the pointer position of the amplitude indicator, first read the working amplitude. 2. Read the rated load from the lifting performance table based on the arm length and amplitude. 3. If the arm length or amplitude of the working position is not at the value given in the table, the lifting weight at this time should be based on the smaller of the adjacent values. 4. The parameters on the lifting performance table are only applicable to the lifting operation area. Lifting operations are strictly prohibited in the "prohibited operation area". D. Outrigger operation: 1. When telescopic and retracting the outriggers, first pull the positioning pin on the fixed outrigger box, manually pull out the movable outrigger to the appropriate position (middle posi...

The Isuzu Cargo Crane Truck is a special vehicle that can be hoisted and transported, which is a combination of a top-mounted crane and a chassis truck. The crane part consists of a jib with several sections of boom, a turntable that can rotate 360°, and a chassis connected to the sub-beam, including an outrigger box, left and right horizontal and vertical outriggers, a lifting mechanism, hydraulic oil circuit, electrical control, etc. Partially composed. Various combined actions of the truck-mounted crane are realized through the actions of telescopic, slewing, lifting hook, luffing and other mechanisms, and lifting operations are realized through the combination of different actions. Isuzu Cargo Crane Truck can be divided into several structural forms. One is the traditional truck-mounted crane structure. The Isuzu stiff boom crane can lift heavy objects through the pitch of the big arm, and can also realize the vertical lifting of heavy objects by retracting and releasing the wire rope through the winch. The other type is the Isuzu knuckle arm crane. The Isuzu knuckle arm crane usually achieves lifting of heavy objects through the expansion of the arm body. The lifting action of the heavy object can be flexibly controlled by controlling the oil cylinder of each arm body. However, if you want to realize the lifting of heavy objects, Vertical lifting requires controlling the posture of each arm body at the same time, which is difficult to operate. Comparison of the advantages and disadvantages of Isuzu folding arm crane and straight arm crane： A. Structural features: The structural characteristics of the Isuzu stiff boom crane are similar to those of the car crane. The telescopic arm part cannot be folded. Due to the limitations of its arm telescopic mechanism, there is only one luffing mechanism, which limits the straight arm crane's ability to operate in a small space. All movements of the knuckle-arm truck-mounted crane are fully hydraulically driven and have two luffing mechanisms. The telescopic arm has a load-retracting function and is flexible in operation. It is especially suitable for operations in small spaces, such as tunnels, shorter factories, etc. In the Pearl River Delta Economic Zone, the relocation and lifting business in factories is almost exclusively dominated by knuckle arm cranes. B. Working principle: The Isuzu stiff boom crane uses the rotation of the drum to drive the wire rope to lift objects and expand and contract the boom. However, all Isuzu knuckle boom crane use hydraulic drive to realize the telescopic and lifting of the boom. Relatively speaking, the working principle of the folding arm crane is more complicated, but its movement is more flexible. Whether it is lifting or moving objects, it takes less time than a straight arm crane. C. Vehicle layout: The straight arm crane is easier to install on the vehicle chassis. The straight arm crane structure is relatively loose, which is conducive to t...

Isuzu GIGA boom truck crane is a multi-functional lifting equipment usually installed on the truck chassis. The Isuzu GIGA boom truck crane has the functions of combined lifting, moving and transportation, and can flexibly lift and transport heavy objects in different sites and working environments. Isuzu GIGA boom truck crane are usually equipped with a strong boom and lifting hook, which can flexibly adjust the height and radius to meet different lifting needs. Isuzu GIGA boom truck crane are widely used in construction sites, industrial fields, ports, terminals and other places. They play an important role in various scenarios, improve work efficiency, and ensure the safe and efficient completion of lifting tasks. 1. Control mechanism： The control mechanism consists of a control linkage mechanism and a control valve.The control valve is a superimposed directional control valve, which is divided into an upper control valve and a lower control valve. The upper control valve is composed of four single-chip reversing valves and a relief valve; the lower control valve is composed of a single-chip reversing valve, four It consists of a single selector valve and a relief valve. The upper control valve controls lifting, luffing, telescopic, and rotation respectively. The lower control valve controls the horizontal expansion and contraction of the outriggers and the vertical expansion and contraction respectively. There is no interlocking between the various mechanisms, and each mechanism can be operated simultaneously. Both sides can be controlled by operating the linkage mechanism. 2. Hoisting mechanism： The lifting and winching mechanism consists of a hydraulic motor, a winch reducer, a drum, a wire rope and a hook.The winch motor is driven by high-pressure oil, and the output shaft produces rotational motion. After being decelerated by the reducer, the small gear drives the large gear to rotate. The large gear is connected to the drum through bolts, so the large gear drives the drum to rotate. Wrap the wire rope around the drum or unwind the wire rope from the drum to drive the hook and weight up or down.There is a built-in brake in the reducer to ensure that heavy objects can stay at any position in the air. 3.Crane arm and telescopic mechanism： It mainly consists of boom, telescopic cylinder, wire rope group, balance valve, etc. The Isuzu GIGA boom truck crane is a pentagonal structure formed by welding high-strength low-alloy steel, with a total of four sections. Special nylon sliders are installed on the head and tail of each section arm to support and reduce friction. The expansion and contraction of the boom is carried out through a telescopic cylinder and a steel wire rope. The piston rod of the telescopic cylinder is articulated with the basic arm, and the cylinder barrel is articulated with the second section arm. The telescopic expansion directly drives the second section arm to expand and contract, and each wire rope group simu...

MAN TGS 3351 fire truck, also can be called MAN fire tender, MAN fire engine, which is a heavy-duty fire rescue vehicle produced by POWERSTAR. The MAN TGS fire truck uses the original Germany MAN TGS 3351 truck chassis as the basis and undergoes specialized firefighting modifications, which mounted with MAN D2676LFAR diesel engine and 375KW/510HP power, emission can be 12400cc, wheelbase is 4500+1400mm and axle capacity for front axle is 6500kg, for rear axle is double 13000kg, tubeless tires 315/80R22.5 with 10+1 sets, including one spare tire. The MAN TGS fire truck is a powerful and reliable heavy-duty fire rescue vehicle. It has a powerful engine and power system, a large-capacity stainless steel 304 material water and foam tank and American brand HALE CB10/100 fire pump system, also mounted with AKRON PSKD10/80WB water foam fire monitor, a variety of fire-extinguishing equipment and reliable tools, and modern communication and navigation systems, full sets breathe apparatus for safety guarantee, also additional fire cabin with apparatus seat, totally 2+4 unit. These features make the MAN TGS 3351 fire truck an effective tool capable of quickly responding to fires, performing firefighting and rescue missions, and protecting the safety of firefighters.   Click me to get more information about MAN fire engine export to Dubai: https://www.isuzutruckscn.com/uploadfile/news/POWERSTAR%20MAN%20Fire%20Engine%20Manual%20export%20to%20Dubai.pdf   Why customer prefer to buy MAN fire truck from POWERSTAR? Engine and power system: MAN fire truck is equipped with a powerful engine that provides high power and high torque output. This allows fire trucks to quickly respond to emergencies and arrive at the fire scene quickly. The power system also has good reliability and durability, ensuring long-term stable operation of the vehicle. Water tank and water pump system: MAN TGS 3351 fire tenders are usually equipped with large-capacity fire water tanks and efficient water pump systems. The water tank is used to store sufficient water source, while the water pump system can provide strong water pressure for fire extinguishing work. This configuration can meet fire protection needs in different scenarios. Fire extinguishing equipment and tools: MAN TGS fire engine is equipped with a variety of fire extinguishing equipment and tools, including fire water guns, sprinklers, fire extinguishers, etc. These equipment and tools can meet different types of fire response needs and ensure the efficiency and safety of firefighters' fire extinguishing operations. Rescue equipment and tools: In addition to fire extinguishing equipment, the MAN TGS fire truck is also equipped with a variety of rescue equipment and tools, such as lifesaving ropes, chainsaws, stretchers, etc. These equipment and tools help firefighters perform emergency rescue tasks, such as rescuing trapped people, opening closed doors and windows, etc. Communication and navigation system: MAN fire te...