ISUZU News

Isuzu hook-arm garbage truck, also known as removable compartment garbage truck and pull-arm garbage truck. This vehicle is widely used for garbage disposal in urban streets and schools. One vehicle can be equipped with multiple buckets, and multiple garbage buckets can be placed at each garbage point. It has a self-unloading function and is hydraulically operated for easy dumping. 1. Overview. The box part of the Isuzu hook-arm garbage truck is completely controlled by the hydraulic system. On weekdays, the truck-mounted garbage can can be placed at various garbage collection stations. After the garbage is collected, the truck can drive directly to the garbage station through the hydraulic system. With the control, you can lower the hook arm installed on the back seat of the garbage truck, hook it to the connection point at the front end of the garbage bin in the station, and pull the garbage bin to the back seat of the vehicle body. At this time, you can start the vehicle and transport the garbage to In the garbage disposal station, self-unloading dumping is carried out. The main advantage of this vehicle is that one vehicle can be equipped with multiple buckets, and one vehicle can maintain the operation of several garbage collection stations. It is highly efficient, and the box is of sealed design, which will not cause secondary pollution. 2. Structure. The Isuzu container-type detachable garbage truck, also known as the pull-arm garbage truck (hereinafter referred to as the garbage truck), is a special vehicle used for the collection, transportation and unloading of bagged and bulk domestic garbage in cities and towns. The vehicle is composed of a car chassis, a pull arm main cylinder, an attached frame, a flip frame, a supporting leg (optional), a locking frame, a locking cylinder and a multi-way reversing valve. One end of the flip frame is connected to the attached frame, and the other end is equipped with a movable pull arm, with a locking system installed in the middle; one end of the movable arm cylinder is connected to the movable arm, and the other end is connected to the attached frame; the locking mechanism passes through the lock The action of the tightening cylinder can integrate the box on the attached frame with the flip frame and the pulling arm when the box is self-unloading, forming a self-unloading angle when the main oil cylinder is extended. It can also be turned over by retracting the locking oil cylinder. The frame and the attached frame are locked as one, and the retraction or extension of the main oil cylinder is used to make the movable pulling arm drag the underground garbage bin to the attached frame or put it back to the ground from the attached frame. The vehicle can pull the garbage and garbage bins in the underground garbage bin to the vehicle for transportation and can also self-unload, reducing the labor intensity of workers. The garbage collection and transportation method of this garbage truck is ...

Isuzu compressed garbage trucks will make precise calculations based on the pressure and flow required by the hydraulic system, and determine the specifications of cylinders, valves, pumps, etc. Selection, installation and design are realized through different calculations. 1. Control analysis and flow chart design When calculating the rated pressure in the hydraulic system of the Isuzu compressed garbage truck, the loading compartment is lifted to a certain position and then returned with a delay. At this time, it can ensure that all the garbage inside the compartment is dumped cleanly, and when the push plate is used for unloading , the filling compartment must be opened first and then dumped, otherwise the dumping cannot be completed. The scraper of the rear-mounted compression garbage truck swings out or the rear proximity switch is turned on to lower the skateboard. This realizes the filling cycle. If there are stones, metal hard objects, etc. in the garbage and the filling is overloaded, it is likely to cause a compression cycle. 2. Choose an appropriate electrical control system When selecting a control system for Isuzu compressed garbage trucks, an integrated multi-circuit solenoid valve is used to configure the electronic control system to achieve sequential control. The start and stop action signals are sent out through the electric button, and then the electronic control method is divided into two main forms. The electronic control method of the first type realizes relay control by detecting the end point and starting point of the cylinder. In addition, a PLC programming control system is selected. Since there is a certain logical relationship between relay circuits, and these systems also need to be controlled through hardware wiring, when comparing the reliability of the two, PLC control appears to be more reliable. 3. Control loop design As an important part of the electrical design, the Isuzu compressed garbage truck control circuit involves the manipulator circuit, scraper and skateboard circuit, push plate circuit, etc. The manipulator loop control is a sequential action, which can be effectively formulated in the structural design of the manipulator. The design is used as a linkage manipulator, and it is composed of cylinder drive and motion-completed garbage loading. These do not need to be controlled in the corresponding sequence. The circuit design between the scraper and the skateboard is such that the garbage is loaded from less to more, and from loose to tight. During this period, the load often fluctuates greatly. When formulating the scraper and skateboard circuit plan, two sequence valves can be used together, and a one-way hydraulic lock can be equipped in the scraper cylinder oil circuit. When designing the push plate circuit, the main purpose is to highlight its role as a chopping board for garbage compression. It is required that the push plate can be pushed forward and backward in the compression direction. This re...

With the continuous advancement of technology, Isuzu rear-loading compression garbage trucks have undergone great reforms, gradually transforming from the previous manual control to the current automated control. The wide application of pressure relays and electromagnetic steering valves in hydraulic systems allows the corresponding electrical systems to form an automated control mechanism, providing support for the automated control operations of Isuzu garbage trucks. Overview of electrical design principles of Isuzu garbage truck control system 1. Process connection and limit protection A limit switch was added to the electrical design of the garbage truck control system, and its position is at the action position of the skateboard and scraper. The limit switch installed here is mainly to detect whether the circuit is connected during the working stage, and to select the output signal through the controllable programmer to ensure that the garbage truck stops changing actions when the scraper and skateboard collide with other parts. , thereby reducing noise and avoiding serious mechanical damage caused by large-movement collisions. 2.Control method The control methods of garbage trucks in the electrical control system mainly include manual and automatic methods. Among them, manual control is basically when the filling mechanism is stuck by a large object or other unexpected situations occur, and manual switch button operation is often selected. Manual operation can reversely operate the scraper to make it move in the opposite direction, thereby freeing the filling mechanism from stuck objects. Normally, garbage trucks are operated automatically. Only when an unexpected situation occurs or the tail box is too full of garbage, the garbage is loaded into the garbage truck through short cycle operation to prevent the garbage from being pushed out. Main hydraulic control systems and component selection 1.Hydraulic steering valve When selecting a steering valve, sufficient research must be conducted, and then a suitable hydraulic steering valve must be selected based on the actual production conditions. Operators often undertake high-intensity labor during operations and have high requirements for system reliability. Two control modes, manual and automatic, are designed for direction control. When selecting a hydraulic steering valve, choose a combined form of steering valve. The valve core is equipped with a manual control machine operating handle, and is also equipped with a solenoid valve and a small cylinder. The cylinder is then controlled by controlling the solenoid valve, and the cylinder pushes the valve core. 2. Fuel tank The oil tank is mainly used for oil storage, and then ensures that the hydraulic system can fully operate the oil, and also has a corresponding heat dissipation effect. The oil tank also has the function of precipitating pollutants that have penetrated into the oil, thereby ensuring that the oil in the entire system is clean...

Isuzu sewage suction truck equipped with a powerful pump system that creates suction to draw the sewage into a tank mounted on the truck. The tank is designed to hold a large volume of liquid waste safely and securely during transportation.Isuzu sewage pump trucks are commonly used by municipalities, sanitation departments, and waste management companies to maintain and clean sewer systems, septic tanks, and other areas where liquid waste accumulates. They play a crucial role in maintaining public health and safety by preventing sewage backups and ensuring proper waste management. 1. Before inhaling the Isuzu sewage suction truck, prepare to close the rear door of the tank of the isuzu sewage suction truck and observe whether the lubricating oil of the vacuum pump oil and gas separator is normal. 2. Operation sequence: a. Depress the clutch pedal, push the power take-off lever to run the vacuum pump of the Isuzu sewage suction truck, and then slowly release the clutch pedal. b. Turn on the Isuzu sewage suction truck alarm switch in the cab. c. Pull the throttle handle to the maximum position, observe the tachometer, and make it reach 500-600 rpm (it has been adjusted at the factory). d. Place the four-way valve switching handle in the suction position, and check whether the air discharged from the trachea is correct, whether there is any sound when the vacuum pump is running, and whether the vacuum gauge is normal. e. Remove the sewage suction hose from the Isuzu sewage suction truck and put it into the sediment well. In order to keep the sewage suction hose in a straight line or freely bent state, the parking position should be fully considered. 3. Precautions for suction operation of Isuzu sewage suction trucks: a. Stones larger than 50mm, cotton yarn, leaves and other impurities will block the straw. So do not inhale and remove frequently. b. When the vacuum gauge reading reaches 65-80 kPa, fully open the ball valve of the sewage suction truck. The half-open state can easily damage the valve core. When inhaling sludge, the suction pipe should be moved frequently. When inhaling high-viscosity sludge, occasionally inhaling air and water can improve the pollution efficiency. 4.Method for discharging sewage from the sewage pumping truck: After the mud and water are separated, open the drainage ball valve, drain the sewage and repeat the suction of mud. You can also pressurize and drain quickly. The operation method is as follows: a. Place the four-way valve switching lever in the "neutral" position, and then place the drainage ball valve in the "open" position to drain sewage reliably by gravity. b. Switch the four-way valve of the Isuzu sewage suction truck to the discharge position, and the vacuum pump continues to work, and the compressed air sewage flowing into the tank will be quickly discharged. c. When draining pressure, the discharge ball valve should be opened first, and then the four-way ball valve can be moved to the discharge position ...

Isuzu sewage suction truck is a special type of vehicle used for the collection and transportation of sewage, waste water, and other liquids from various sources such as drainages, septic tanks, and other similar places. It is designed with a tank at the rear of the vehicle, usually made of steel or other durable materials, which is capable of holding a large volume of liquid. Isuzu sewage suction truck is equipped with a powerful vacuum pump system that creates a vacuum to suck up the sewage and liquid waste into the tank. Isuzu sewage suction trucks are typically used by municipal authorities, waste management companies, and sanitation departments to maintain clean and hygienic environments. 1. Maintain the appropriate rotational speed of the vacuum pump of the Isuzu sewage suction truck: If the vacuum pump rotational speed is too high, the rotor will heat up. If the rotational speed is too low, it will cause engine knocking and cause additional shock to the components, which will affect the service life. At the appropriate working speed, adjust the maximum adjustment of the hand throttle in advance. Sewage suction truck pump type xd-44 is suitable for rotation speed of 500-600 rpm. 2. The isuzu sewage suction truck is hydraulically lifted and dumped on flat ground. Isuzu sewage suction trucks are strictly prohibited from hydraulically lifting and dumping on sloping roads. If they are hydraulically lifted and dumped on sloping roads, the uneven road surface will cause the weight of the vehicle body to tilt to one place, causing distortion and deformation of the components there, and easily causing a rollover accident. 3. When hydraulically lifting the isuzu sewage suction truck, open the rear door window first. The rear door of the tank should be opened before hydraulic lifting to unload sludge. It is strictly prohibited to hydraulically lift the tank body of the isuzu sewage suction truck before opening the rear door of the tank, because the center of gravity will shift backward after lifting, which may cause the risk of overturning. 4. When taking power from the clutch oil pump and vacuum pump power take-off of the isuzu sewage suction truck, the driver should control the accelerator, make the engine idle, and fully step on the clutch pedal. After hooking up the power take-off to take power, the driver should slowly release it. Clutch pedal. Do not hang up the power take-off without depressing the clutch, otherwise the power take-off gear will hit the running gearbox gear, causing damage to both gears. The power take-off lever of the Isuzu sewage suction truck must be placed in the middle position when the vehicle is driving. 5. Do not use isuzu sewage suction trucks to inhale or transport waste oil and dangerous goods. When entering or repairing the sludge tank of Isuzu sewage suction truck while the sludge tank is hydraulically lifted, support rods and safety stops must be used. When transporting sewage, a manual rear door tank clamping dev...

The garbage bin of the Isuzu compressed garbage truck is made of high-strength weather-resistant steel plates. The side plates use an integrated forming process, with an arc shape, solid structure, beautiful appearance, light weight, good stress resistance, and large loading capacity. The push shovel is composed of a rectangular tube frame and high-strength weather-resistant plate, with a streamlined pushing surface. It is not only lightweight in structure, but also can load materials smoothly and discharge materials cleanly and thoroughly. The filler is mainly composed of the filler assembly, sliding plate, scraper and other components. Each component adopts a beam plate or box structure with good stress. They are all made of high-strength weather-resistant steel plates, with a solid structure and light weight. The garbage is in a closed state during the compression, filling and transportation process, eliminating the phenomenon of garbage dust flying and odor drifting during the transfer process. The joint surface between the garbage bin and the filler is equipped with a special rubber sealing strip, and a hydraulic locking device is used to compress and seal for good sealing; the lower part is designed with a specially structured water tank for double protection, which effectively prevents sewage dripping and eliminates secondary pollution. . The whole vehicle adopts electro-hydraulic control valves and PLC programmable control system, which comprehensively utilizes the advantages of electronic control and hydraulic control. Through electro-hydraulic joint control, it effectively solves the interface problem between the hydraulic system and the electrical system and improves the reliability of use. When the Isuzu compressed garbage truck is operating, the engine power output is automatically controlled through the electronic throttle controller to ensure that the engine can automatically select acceleration and idle states under various operating conditions of the garbage truck, avoiding power loss and system heating, reducing fuel consumption, and being economical. Good sex. It adopts imported electro-hydraulic multi-way valve and PLC programmable controller for integrated control, and uses a logic loop to ensure that each operation instruction is executed in sequence, which reduces the failure rate, avoids accidents caused by misoperation, and improves reliability. An emergency stop button is set up to stop the garbage filling operation device in any state or position to ensure the safety of workers and equipment. The lifting cylinder is equipped with an explosion-proof valve to prevent the loader from descending when the oil pipe suddenly bursts. It is also equipped with a safety brace to ensure the safety of personnel during maintenance. It has two operating modes: automatic and manual. The operation control boxes are installed in the cab and the rear of the vehicle respectively, making it very convenient to use and operate. Different user...

Isuzu sewage suction trucks, also known as vacuum sewage suction trucks, are sanitation vehicles that use the principle of vacuum negative pressure to suck sewage. It's core component is the vacuum pump. There are generally two types of vacuum pumps used in sewage suction trucks: 1. Water ring vacuum pump: The water ring vacuum pump (we refer to it as the water pump) is divided into an air inlet and an exhaust port, a stator and a rotor (impeller), and the air inlet is connected internally with the sewage suction tank. The impeller is eccentrically installed on the stator or casing, and the pump body is filled with an appropriate amount of water (antifreeze can be installed in winter) as the working medium liquid. When the impeller rotates, the water is thrown to the wall of the pump body under the action of centrifugal force, forming a closed rotating water ring with a shape similar to the pump body and nearly the same thickness. At this time, a crescent-shaped space is formed between the impeller and the water ring to form a vacuum. And this space is divided by the impeller into several small cavities equal to the number of blades. During one working cycle of the impeller, the volume of the small cavities in the first half of the cycle increases from small to large, and is connected to the suction port on the end face (inside the sewage suction tank) The gas is sucked in; in the second half of the cycle, the small cavity changes from large to small, and the gas is compressed. When the small cavity is connected to the exhaust port, the gas is discharged out of the pump. With the rotation of the impeller, the suction and exhaust process proceeds continuously and stably, so the gas can be continuously sucked, forming a negative pressure state in the suction tank, so that through the suction tank at the end of the suction tank. For example, the sewage is pumped into the sewage suction tank to achieve the purpose of sewage suction. 2. Rotary vane vacuum pump: Rotary vane vacuum pumps are also called oil pumps. The principle of this pump is similar to that of a water ring vacuum pump. Both vacuums are formed by compressed air, but the working environment is completely different. Water ring vacuum pumps are cooled by liquid, while rotary vane vacuum pumps are cooled by air. The rotary vane vacuum pump consists of an air inlet, an exhaust port, a rotor, and a rotary vane. The rotor is eccentrically fixed on the stator. There are grooves on the rotor for installing the rotary vane. The rotor can expand and contract radially according to the wall of the pump body cavity so that it can fit closely with the pump cavity. When force is applied, the eccentric rotor drives the rotary vane to slide close to the inner wall of the pump under the action of centrifugal force. The volume of the suction working chamber gradually increases in the first half of the cycle, and the pumped gas is sucked into it until the rotary vane rotates to the end of suction. , as the...

Isuzu sewage suction trucks are specifically designed to collect and transport sewage from various locations. They are equipped with a large tank and a powerful suction pump to efficiently remove and store sewage. Isuzu sewage suction trucks are commonly used by municipal authorities, sanitation departments, and cleaning services for sewer cleaning and maintenance tasks. 1. How to clean Isuzu sewage suction truck？ Isuzu sewage suction trucks are mainly used to clean urban sewers, pipeline sediments, clear mud ditches in dead corners, clean industrial drainage pipes, walls, etc. After being used for a long time, it is necessary to clean the sewage suction trucks. So how to clean the sewage suction trucks? To clean the Isuzu sewage suction truck, you need to use a special car wash place. Choose a ventilated and cool place, and use a car wash towel to scrub the body. During the cleaning process, you should pay attention to the following major items: A. Do not clean the sewage suction truck frequently to avoid damaging the paint of the sewage suction truck. B. Use clean water when washing your car, otherwise the fine sand in the sewage will wipe the car paint. If the temperature is low throughout the day, wash with warm water. C. Use a clean, dedicated car wash. Generally, towels have strong friction and can easily damage the stain-absorbing car paint. Especially after washing the car, you should wipe off the moisture on the car body immediately to avoid residual freezing and damage to the car paint. D. Wash your car in a ventilated and cool place. It is best to wash your car in a sunny place on a sunny day. E. When washing the car, pay attention to the waterproofing of certain parts of the sewage suction truck, such as horns, lights, door lock holes, etc. To avoid horn failure. The door lock cannot be opened if the light becomes foggy or water enters the winter door lock hole. F. Do not wash the sewage suction truck immediately after driving in winter. Before washing the car, you should wait until the engine temperature of the sewage suction truck drops to prevent thermal expansion and contraction from damaging the engine. 2. How to maintain Isuzu sewage suction trucks？ In order to extend its service life, in addition to paying attention to regular cleaning, other aspects of maintenance and upkeep should also be done. The main attention should be paid to the maintenance of sewage suction trucks: A. When the sewage suction truck is used for the first time, engine oil should be added to the pump. In low-temperature areas, antifreeze engine oil should be added. To ensure the normal operation of the sewage suction truck. B. The sealing ring of the rear tank door of the sewage suction truck should be cleaned after work. If there is leakage, the sealing ring of the rear tank of the sewage suction truck needs to be replaced to prevent the sealing ring of the rear tank door of the sewage suction truck from being used for a long time. resulting in reduced se...

The compressed garbage truck is an innovative waste management solution designed to efficiently collect and transport large volumes of solid waste. This specialized truck employs a compactor mechanism that compresses garbage to maximize load capacity and reduce the number of trips required to transfer waste to disposal sites. 1.Usage characteristics and scope of use Isuzu rear loading and unloading garbage trucks, also known as compression garbage trucks, are special transportation equipment for sanitation. It is mainly used to collect, compress and transport urban domestic waste. It can also be used to collect, compress and transport some lightly thrown and scattered industrial and agricultural waste. It is used for the collection, transportation and unloading of bagged, barreled and bulk domestic waste in cities and towns. Special vehicles for material operations. This series of models can optionally be equipped with a rear bucket turning mechanism and a hydraulic trash can turning mechanism. The rear bucket turning mechanism is suitable for unloading and transporting garbage with a trolley or manually. The trash can flipping mechanism is suitable for 120-liter, 140-liter, 240-liter plastic trash cans and 350-liter metal trash cans. 2. The box body adopts a square warehouse structure, which is composed of a bottom frame, a box body and a push plate. The chassis is made of 16Mn steel plates of different thicknesses bent into different types of grooves and beams and welded together, and is connected to the chassis beam through steel plates and bolts. The box body consists of a bottom plate, left and right side plates, and a top plate. The bottom plate and bottom plate transverse lining are welded to the bottom frame, and the side plates have longitudinal groove slides to guide the movement of the push plate; the side plates and side plate columns are welded to stand on the bottom plate, and the top plate, top plate transverse lining and side plates are welded Connection; the rear of the box is made with an inclination angle of 20°. The push plate is composed of steel plates, grooves and beams welded together. It is installed in the box and moves longitudinally in the box through the push plate oil cylinder and guide slide. 3. The compression package consists of a filler, a sliding plate and a scraper. The filler consists of a side vertical plate frame, a bottom curved garbage filling bin, an upper cover, etc. It is welded by steel plates, troughs, and beams. The side vertical plate frame of the filler is equipped with an inclined slide to control the sliding plate and scraper. Plate movement guide; the bottom plate of the filler is made into a curved surface according to the movement trajectory of the slide plate and scraper, which is the location for garbage filling, and is equipped with a drainage outlet; the top of the filler is connected to the box through a hinge shaft, and the package and box are compressed A T-shaped sealing strip is insta...

The Isuzu sewage suction truck consists of two parts: the Isuzu chassis (ELF/FV/GIGA) and the tank body. The ground sewage suction pump is equipped with a vacuum pump and a water circulation pump. The upper part of the sewage suction truck includes an oil-water separator, a water vapor separator, a hydraulic dump device, a special vacuum sewage suction pump, a volumetric pressure gauge, a suction conduit, a gravity valve, a vacuum tank, and a connector (depending on the Manure window), fully automatic anti-overflow valve and hydraulic package. Of course, most sewage suction trucks are now equipped with water circulation pumps. Then how can we properly maintain the Isuzu sewage suction truck: 1. Precautions for the transmission: Check various connections frequently, and check the connection between the power take-off of the sewage suction truck and the sewage suction pump frequently. The connection should be reliable and operating normally, and whether the directional couplings, etc. are abnormally shaken or loose. If oil leakage is found in the power take-off and water pump during use, the seals should be replaced. If the defective parts are not repaired and continue to operate, it will bring adverse consequences to major devices such as pumps and power take-offs. 2. The oil separated by the oil and gas separator (for vacuum pump lubrication) (oil and gas separator) can be reused as vacuum pump lubricating oil, but the separated water will be stored at the bottom of the tank, so it must be drained after the operation. If you forget to drain, it will be inhaled. Failures such as sintering may occur in the pump. If the oil is used for a long time, the lubricity and air tightness will be reduced. Therefore, the interior should be cleaned regularly and the oil should be replaced. When the vacuum degree is about 93 kPa, the oil level should be replenished to the middle mark under the dipstick. Use HT-40 # mechanical oil and clean the interior once a month. 3. Gas-water separator with one-way valve (gas-water separator with one-way valve). It is a device that automatically works to prevent sewage from entering the pump in case the automatic suction stop device fails when the tank is full. Inhaling sludge with a lot of oil content will easily corrode the ball seats and balls, so replace them regularly. In addition, it is easy to accumulate sewage during operation, so the float must be drained and cleaned after the operation is completed. 4. After long-term use of the rear tank door clamping device, dirt will occur inside and the hand wheel must not be tightened. Therefore, the interior should be disassembled and cleaned every 6 months. At this time, the grease should be replenished appropriately. 5. Replenish grease: The sewage truck replenishes grease, hydraulic working oil strips and 20# mechanical oil for international use, and 30# mechanical oil for summer. 6. Add about 200 ml of oil into the pump before use t...

Isuzu garbage trucks are widely used. It is suitable for sanitation, municipal administration, factories and mines, property communities, and residential areas with a lot of garbage. One vehicle can carry multiple large compartments, which can effectively avoid secondary pollution during loading and unloading. Main uses of Isuzu garbage trucks Garbage trucks are mainly used to carry domestic garbage. They can also transport bulk construction materials such as ash, sand, stone, soil, etc. They can also transport ore or coal in mines or coal construction. Function introduction of Isuzu swing arm garbage truck: the garbage bucket can be hoisted up and down, and the swing arm has a working cycle time of 60 seconds. The characteristic of this truck is that the garbage bucket is separated from the vehicle body, which can realize the combined use of one truck and multiple garbage buckets for cyclic transportation. It fully improves the transportation capacity of the vehicle and is especially suitable for short-distance transportation, such as the cleaning and transportation of urban garbage by the environmental sanitation department. Detailed introduction of Isuzu compression garbage truck Compressed garbage truck: It adopts electromechanical and hydraulic integration technology and uses a mechanical, electrical and hydraulic combined automatic control system to realize garbage loading, crushing or flattening, and powerful filling through special devices such as carriages, loaders, and push shovels. Finally, the garbage is compacted and squeezed into the carriage, and transported to the destination for automatic push and unloading. Its outstanding features: simple and efficient garbage collection method, repeated compression and other functions, high compression ratio, large loading mass, automated operation, good power and environmental protection, and high vehicle utilization efficiency. Introduction to compressed garbage trucks: Compressed garbage trucks mainly use special devices such as garbage compartments, fillers, shovels, and hydraulic systems to dump, crush or flatten garbage. They are convenient and efficient in garbage collection and can automatically and repeatedly compress. Garbage, as well as the characteristics of compression function, high compression ratio, large loading capacity, automated operation and good sealing. The compressed garbage truck is fully sealed. The sewage during the compression process directly enters the sewage compartment, completely solving the secondary pollution during the garbage transportation process. The key components are imported. Equipped with a hanging bucket lifting frame, it can be used with the nationally-used iron buckets or plastic hanging buckets and loaded with force to push the garbage into the carriage and compact and push it away. The significance of Isuzu garbage trucks Garbage trucks are mainly used for municipal sanitation and large factories and mines to transport various garbage, especiall...

Regularly inspect the garbage truck for any wear or damage to important components such as wheels, hydraulic systems, and the body of the truck.Follow the manufacturer's recommended maintenance schedule for oil changes, filter replacements, and other routine maintenance tasks. 1. Tire pressure is too high The tire inflation pressure of wheeled engineering machinery is an important factor that determines its service life and work efficiency. Tire pressure that is too high or too low will affect its service life and is not conducive to safe driving, especially in hot summer. The scientific inflation specification should be: based on the tire's standard air pressure, the tire pressure should be slightly adjusted as the temperature changes. For example: summer should be 5%-7% lower than winter, because considering that the temperature in summer is high, the gas is heated, and the pressure increases. On the contrary, in winter, the standard air pressure must be reached or slightly lower. 2. Boil the water tank and add cold water. Overloading of the engine, poor heat dissipation or lack of water in the water tank will cause the water tank to boil. If cold water is added immediately at this time, the cylinder head and cylinder body will burst. Therefore, once the water tank is found to be boiling during use, emergency measures should be taken to stop the operation and allow the diesel engine cooling water to cool down on its own. 3. New cylinder liners and pistons can be installed without optional accessories. When replacing the cylinder liner and piston, it is considered that the new cylinder liner and piston are standard parts and are interchangeable, and they can be used as soon as they are installed. In fact, the dimensions of the cylinder liner and piston have a certain tolerance range. If the largest size cylinder liner is matched with the smallest size piston, the matching gap will be too large, resulting in weak compression and difficulty in starting. Therefore, when replacing, you must check the size grouping codes of the standard cylinder liner and piston. The cylinder liner and piston used must make the size grouping code of the standard piston the same as the size grouping code of the standard cylinder liner. Only in this way can the difference between the two be guaranteed. With standard fit clearance. In addition, when installing cylinder liners and pistons with the same group code in each cylinder, attention should also be paid to checking the cylinder plug clearance before installation. In order to ensure the installation standards, an inspection should be carried out before installation to prevent the installation of counterfeit and inferior products. 4. Failure to check plunger stroke allowance During the test of the plunger fuel injection pump, many maintenance personnel do not pay attention to checking the stroke margin of the plunger. The so-called stroke allowance of the plunger refers to the amount of movement that the plunger can...