The Isuzu FVR 3.5 cubic meter foam fire truck, with a GVW 22-ton capacity, 4500mm wheelbase, and double-row cab, equipped with an Isuzu 6HK1-TCG60 300hp engine and Fast 9-speed gearbox. It features an internal tank system, housing a 3000L carbon steel water tank and a 500L stainless steel foam tank. Equipment compartments are located on both sides, and the pump room is at the rear, equipped with a CB10/40-XZ fire pump, control panel, 50m fire hose reel, firefighting equipment, and a PL8/32 fire monitor on the roof.
Manufacturer:
Powerstar TrucksWork capacity:
3cbm water,0.5cbm foamDimension:
8000 x 2500 x 3600mmCabin type:
Isuzu GIGA double row cab,2+3 seatsWheelbase:
4500mmEngine power:
300HP/221kWEngine type:
ISUZU 6HK1-TCG60Axle drive:
4x2,LHDGear box:
FAST 9-speed,manualRemarks:
Tank capacity availableThe ISUZU 4X2 drive police fire rescue truck is composed of an ISUZU Class II truck chassis, tank, water pump, piping, instrument and electrical systems, etc. It has a liquid capacity of 3.5 cubic meters (3.0 cubic meters water/0.5 cubic meters foam) and is equipped with a CB10/40 fire pump and a PL8/32 dual-purpose fire monitor. The vehicle integrates water storage, foam storage, high-pressure water supply, long-range spraying, and equipment transport, making it suitable for urban factories, industrial parks, and township fire brigades. It can extinguish solid fires and flammable liquid fires, meeting the needs of conventional firefighting, cooling and isolation, and emergency rescue operations.
|
Working Capacity |
Engine Model |
Wheelbase |
Superstructure |
|
3000L water+500L foam |
6HK1/ 300HP |
4500mm |
★ Water and foam tank stainless steel ★ China famous CB10/40-XZ fire pump ★ China famous PL8/32 Fire monitor ★ 2026 year brand new |
▶ Product Parameter:
| ISUZU FVR 3500L foam water fire truck | |||
|
General |
Work capacity |
3000L water tank,500L foam tank |
|
|
Truck chassis |
ISUZU FVR，double row |
||
|
Engine Power |
300 HP/ ISUZU 6HK1-TCG60 |
||
|
Fire pump |
CB10/40-XZ |
||
|
Chassis |
Drive Type |
4X2 |
|
|
Transmission |
FAST 9-speed, manual |
||
|
Wheelbase |
4500mm |
||
|
Tire |
Front 385/65R22.5,rear 315/80R22.5,6+1 wheel |
||
|
Fire pump |
Model |
CB10/40-XZ |
|
|
Rated Pressure |
1.0MPa |
||
|
Flux |
40L/s |
||
|
Max work pressure |
1.144MPa |
||
|
Max allowable inlet pressure |
0.4MPa |
||
|
Max suction height |
7m |
||
|
Rated speed |
3135±50r/min |
||
|
Foam Proportioning Mixer |
Model |
PH64-RS |
|
|
Mixing ratio |
6% |
||
|
Work pressure range |
0.6～1.4MPa |
||
|
Flow range |
16～64L/s |
||
|
Suitable foaming liquid categories |
Category B |
||
|
Fire monitor |
Model |
PL8/32 |
|
|
Flow |
32L/s |
||
|
Rated working pressure |
0.8MPa |
||
|
Range |
Water |
≥60m |
|
|
Foam |
≥48m |
||
|
Pitch rotation |
- 45～+70° |
||
|
Horizontal rotation |
0～360° |
||
|
Suction tube |
125*2m,4pic |
||
|
Standard configuration |
All standard accessories: Fire hose, filter, coupling, wrench, water /foam gun, basic tool kit, English manual…… |
||
ISUZU 3500 liters water fire fighting apparatus technical drawing
▶ Chassis Specifications:
• Model: ISUZU FVR, GVW 22 tons
• Wheelbase: 4500mm
• Cabin: Double-row crew cab
• Engine: ISUZU 6HK1-TCG60 inline six-cylinder diesel engine, 300 hp
• Transmission: Fast 9-speed manual transmission, with high and low gears
▶ Tank Body:
The tank body adopts an internal structure, with a 3 cubic meter carbon steel water tank and a 0.5 cubic meter 304 stainless steel foam tank in the middle.
• Two manhole covers with quick-locking and opening devices.
• Two level indicators.
• Two drain ports, manually controlled by valves.
• One breather valve.
• One overflow device.
▶ Equipment Rooms:
located on both sides of the tank.
• Material: The frame is made of high-quality steel; the inner lining is made of anodized aluminum alloy checkered plate bonded together.
• Structure: All-steel frame welded structure. Each side of the equipment box has three aluminum alloy roller shutter doors, and the rear of the pump room has one aluminum alloy roller shutter door. Lightweight, reliable, and low-noise.
• Equipment Storage: The left front equipment room has equipment racks that can be pulled out for storage. Next to them are pull-out uprights for hanging shovels, crowbars, above-ground fire hydrant wrenches, underground fire hydrant wrenches, axes, picks, hammers, wrenches, etc., for easy access. The middle equipment room can store fire extinguishers, hose bridges, hooks, and protective coverings. The right front equipment room can store fire hoses. The remaining equipment rooms can hold other equipment.
 |
 |
▶ Pump Room:
• Fire Pump
Model: CB10/40 Atmospheric Pressure Fire Pump
Flow Rate: 40L/s
Pressure: 1.0Mpa
Maximum Suction Depth: 7m
Priming Time: ≤35s
Foam Proportioning Mixer: Ring Pump Type, PH64 Model, Mixing Ratio 3%~6%, Flow Rate 64L/s
 |
 |
 |
• Control Panel:
integrated with operating instructions, precautions, water tank and foam tank structural diagrams, vacuum gauge, tachometer, pressure gauge, water level gauge, foam level gauge, emergency stop switch, main power supply, equipment room lights, side lights, taillights, pump room lights, accelerator buttons, etc.
• Firefighting Equipment:
Fire hoses, fire reel, water collectors, water distributors, filters, reducers, suction wrenches, fire nozzles, foam nozzles, foam suction hoses, etc.
 |
 |
 |
Tank pipeline diagrams
• PL8/32 Fire Monitor System
Flow Rate: 32L/s
Range: Water ≥60 m, Foam ≥48 m
Operation: Manual/Remote Control Dual Mode, supports 360° horizontal rotation and -45° to +70° elevation rotation. Can spray water or foam liquid; the foaming cylinder can be removed for use as a water cannon; also features blooming and direct current functions.
|
Fire Monitor Model |
Flow |
Range |
Rated Pressure |
Pitch Rotation |
Horizontal rotation |
Weight |
|
PL8/32 |
32L/s |
water ≥60m, foam ≥48m |
0.80MPa |
-45°～+70° |
0～360° |
23kg |
▶ Piping System:
▪ Tank Piping Material: Seamless steel pipe, connected to various components via flanges.
▪ Tank Outlet Piping: Equipped with one DN125 outlet pipe, water enters the fire pump from the tank, equipped with one DN125 manual butterfly valve, connecting the water tank and fire pump via a DN125 flexible joint.
▪ External Inlet Piping: A DN125 external inlet is located at the rear of the fire pump, connected to a 125 suction pipe with a snap-fit interface.
▪ External Tank Injection Piping: One DN65 tank injection pipe on each side.
▪ Outlet Piping: One DN80 and one DN65 atmospheric pressure outlet on each side of the fire pump.
▪ Drain Piping: A drain valve is installed at the lowest point of the pipeline to protect the pump and ball valves.
▪ Cooling Water Piping: Equipped with cooling water piping and ball valves to enable the power take-off unit to handle various complex situations during operation.
▶ Electrical System:
• A 1.6-meter-long row of blue LED warning lights is installed on the roof of the cab.
• A blue rotating light and fire searchlight are installed on the rear roof of the vehicle.
• Red flashing lights and side lights are installed on the upper sides of both sides of the vehicle. Lighting is also installed in the equipment compartments and pump room.
ISUZU 3.5CBM foam fire fighting truck
▶ Factory testing:
Fire Fighting Foam Truck, ISUZU Water Tank,Tank Fire Engine, Water Fire Vehicle, Water Fire Engine, Water Fire Fight Truck,
Learn More
ISUZU Fire Fighting Truck, Water Fire Fight Truck,ISUZU Fire Vehicle,ISUZU Water Tank, Water Fire Engine,Foam Fire Vehicle
Learn More
Water Tank Fire Truck,Fire Fighting Foam Truck,Diesel Fire Truck,Fire Truck Vehicle,Water Fire Vehicle,Tank Fire Engine
Learn More
good quality 8000L FVR ISUZU 4x2 Water/Foam Fire Vehicle for sale,,60000L ~ 8000L ISUZU FVR FTR 4X2 Fire Fighting Truck,iSUZU Water Fire Fighting Truck with Good Fire Pump
Learn More
6*4 Water-Foam Fire Truck for Isuzu,Isuzu water foam Fire Truck 8000-15000L,Low price 10000Liters Isuzu Foam Fire truck
Learn More
