This model is an Isuzu 100P single-cab water tanker fire truck. It carries 3 cubic meters of water and is equipped with a CB10/30 fire pump and a PL8/30W fire monitor. The vehicle integrates water storage, high-pressure water supply, long-range spraying, and equipment transport, making it suitable for township fire brigades, enterprise fire brigades, and community emergency stations.
Manufacturer:
Powerstar TrucksWork capacity:
3000L waterDimension:
6200 x 2250 x 2990 mmCabin type:
ISUZU 100P single row cabWheelbase:
3360mmEngine power:
130HP/96kWEngine type:
ISUZU 4KB1-TCG60Axle drive:
4x2,LHDGear box:
ISUZU MSB 5-speed,manualRemarks:
Tank capacity availableThe ISUZU Fire Engine Truck Body Builder weighs 7.3 tons, has a 3360mm wheelbase, a single-row cab, and is equipped with an Isuzu 4KB1-TCG60 130hp engine and an MSB 6-speed gearbox. It features an internal tank with a 3000L carbon steel water tank, equipment compartments on both sides, and a pump room at the rear. It is equipped with a CB10/30-RS fire pump, control panel, firefighting equipment, a PS8/30W fire monitor on the roof, roof flashing lights, and other illumination. The pump has a 100mm suction inlet, one DN65 water inlet on each side of the fire pump, and one DN80 atmospheric pressure outlet on each side.
* ISUZU 4X2 drive police fire rescue truck *
|
Working Capacity |
Engine Model |
Wheelbase |
Superstructure |
|
3000L water |
4KB1/ 130HP |
3360mm |
★Water tank carbon steel ★China famous CB10/30-RS fire pump ★ China famous PL8/30w Fire monitor ★ 2026 year brand new |
▶ Product Parameter:
|
Isuzu 4X2 drive police fire rescue truck |
||||
|
General |
Overall Dimension |
6200 x 2250 x 2990 mm |
||
|
Work capacity |
3000L Carbon steel water tank |
|||
|
Chassis |
Wheelbase |
3360mm |
||
|
Cab Capacity |
2 persons allowed |
|||
|
Drive Type |
4X2 (left hand drive) |
|||
|
Engine Model |
ISUZU 4KB1-TCG60@130HP/96kW |
|||
|
Transmission |
Isuzu MSB 5-shift, 5F&1R,manual |
|||
|
Tire Specification |
700 R16,6+1 tires |
|||
|
Fire performance |
Fire pump |
Pump Model: |
CB10/30-RS |
|
|
Flow Rate |
30L/s@1.0MPa |
|||
|
Max work pressure |
1.143MPa |
|||
|
Suction depth |
7m |
|||
|
Priming Time |
≤35s |
|||
|
Fire monitor |
Model |
PS8/30W |
||
|
Rated work pressure |
0.8MPa |
|||
|
Rated flow |
30L/s |
|||
|
Water: ≥60m |
||||
|
Pitch Rotation |
-30～+70° |
|||
|
Horizontal rotation |
0～360° |
|||
▶ Tank:
|
Item |
Specification |
|
Capacity |
3000L |
|
Material |
The water tank is made of high‑quality carbon steel plate, with anti‑corrosion treatment for inner surface. |
|
Tank bottom plate: 4mm carbon steel plate |
|
|
Tank side plate & end plate: 3mm carbon steel plate |
|
|
Tank top plate: 3mm carbon steel checkered plate |
|
|
Structure |
Steel plate welded construction, equipped with anti‑swash baffles inside |
|
Accessories |
²1 set manhole cover with quick‑lock & quick‑open device |
|
²1 set liquid level gauge |
|
|
²1 drain outlet with manual valve control |
|
|
²1 overflow device |
|
|
Illustration |
|
▶ Fire pump:
|
Model |
CB10/30-RS Normal‑pressure Fire Pump |
|
|
Flow Rate |
30L/s |
|
|
Pressure |
1.0Mpa |
|
|
Maximum Suction Depth |
7m |
|
|
Priming Time |
≤35s |
|
|
Pump shaft speed |
3746±50r/min |
|
|
Vacuum Pump Type |
Piston type |
|
|
Installation Type |
Rear‑mounted |
▶ Piping system:
|
Tank Piping Material |
High‑quality seamless steel pipes, connected to each component via flanges. |
|
Tank Outlet Piping |
Equipped with one DN100 tank outlet pipeline for water flowing from tank to fire pump. Fitted with one DN100 manual butterfly valve. The water tank and fire pump are connected by DN100 flexible joint. |
|
External Inlet Piping |
One DN100 external water inlet at rear of fire pump for connecting 100‑mm suction hose, threaded pipe‑thread connection. |
|
Outlet Piping |
※One DN80 normal‑pressure outlet on each side of fire pump. |
|
※One DN80 monitor pipeline with DN80 flexible joint, controlled by DN80 monitor ball valve. |
|
|
Filling Piping |
※Two DN65 external filling pipelines, arranged on left and right sides inside pump compartment. |
|
Drain Residual‑water Piping |
Residual‑water drain valve is installed at the lowest point of piping system to protect water pump and ball valves. |
|
Cooling Water Piping |
Cooling‑water pipeline and ball valve are equipped for power take‑off (PTO) to handle complex operating conditions. |
▶ Fire monitor:
|
Model |
PS8/30W |
|
|
Flow Rate |
30L/s |
|
|
Range |
≥60 m |
|
|
Working Pressure |
0.8MPa |
|
|
Rotation Angle |
Horizontal: 360°；Elevation: -35°～70° |
▶ Fire Equipment box:
|
Material |
The frame is made of high‑quality section steel; the inner lining panel adopts bonded structure of oxidized aluminum alloy checkered plate. |
|
Structure |
All‑steel frame welded structure. Each side of equipment compartment is equipped with 4 pieces of aluminum alloy roller shutter doors. One piece of aluminum alloy roller shutter door is fitted at the rear end of pump compartment. Light‑weight, reliable and low‑noise. |
|
Illustration |
|
Best quality 15m height Isuzu Water Tower Fire Truck for Aerial Working manufacturer, Isuzu Fire-Fighting Vehicle, Foam Fire trucks Isuzu, Isuzu chassis Water foam type fire tender, Emergency Rescue Vehicle, Dry powder fire truck
Learn More
ISUZU Fire Fighting Truck,ISUZU Fire Vehicle,ISUZU Fire Engine,ISUZU Water Tank,Water Tank Fire Engine,Dry Powder Fire Engine,
Learn More
Diesel Fire Truck,Water Tank Fire Truck,Dry Powder Fire Truck,Foam Fire Truck Tank Fire Engine,Water Tank Fire Vehicle,
Learn More
6HK1-TCSG40 206KW ISUZU FIRE TRUCKS WITH 6000Liter capacity, Isuzu dry powder foam fire truck, fire truck specifications,Pump Fire Fighting Truck Isuzu brand
Learn More
fire engine truck dongfeng for sale armenia,High quality Foam Fire Truck Specifications,ISUZU fire truck water capacity 12000l, fire truck specifications
Learn More
