Honduras 16m 20m Hydraulic Man lifter Body Kit
The 16m aerial work platform truck upper body kits features a 3-section synchronous telescopic boom with 360° rotation, front V rear H shaped single-section hydraulic outriggers, stainless steel railings, and aluminum alloy anti-slip walkways. It is equipped with turntable operation, wireless remote control operation, and ground hydraulic handle operation; and multiple safety devices.
Manufacturer:
Powerstar TrucksWork capacity:
16mDimension:
4950 x 2200 x 2330 mmRemarks:
Aerial working capacity can be customizedThe Honduras 16m 20m Hydraulic Man Lifter Body Kits are compatible with Isuzu chassis, featuring a 3-section telescopic boom with a maximum working height of 16 meters. The boom extends and retracts smoothly with no dead angles during rotation. It supports multiple control modes and is equipped with a comprehensive safety system, including multiple limit switches, self-locking, and overload protection working simultaneously. The suspended platform remains level at all times, ensuring flexible and safe operation. It is suitable for various high-altitude work scenarios such as street light maintenance, advertising installation, and exterior wall maintenance.
▶ Product Parameters:
|
16m aerial working truck upper body kits |
||||
|
Vehicle Description |
||||
|
Overall dimensions |
4950x2200x2330mm |
Operational height |
16m |
|
|
Curb weight |
2750kg |
Adaptable chassis |
Isuzu |
|
|
Working condition |
||||
|
Max. working height |
16m |
|||
|
Platform height maximum |
14.3m |
|||
|
Horizontal stretch length |
11.3m |
|||
|
Working range at the max height |
2.6m |
|||
|
Platform height at max working range |
2.5m |
|||
|
Outrigger Span |
2.95m |
|||
|
Control mode |
Turntable fixed operation, wireless remote control box operation and underground hydraulic handle operation ; an electric emergency pump is equipped to enable full-hydraulic electric emergency operation of the whole vehicle. |
|||
|
Bucket |
||||
|
Rated loading |
200kg,anti-slip floor |
|||
|
Size |
1400*700*1000 mm |
|||
|
Material |
Stainless steel |
|||
|
Adjusting balance mode |
Hydrostatic Leveling System |
|||
|
Safety belt |
1 set |
|||
|
Boom |
||||
|
Type |
Telescopic arm type |
|||
|
Section |
3 section synchronous telescopic arm |
|||
|
Rotation Angle |
360° |
|||
|
Thickness of boom plate |
4mm |
|||
|
Max. rising angle of boom |
0º ~ +80° |
|||
|
Outrigger |
||||
|
Type |
Front V type / Rear H type |
|||
|
Number |
4 |
|||
|
Adjustment |
Adjusted separately |
|||
|
Supporting leg Control mode |
Manual hydraulic operation |
|||
|
Hydraulic lock |
Two-way hydraulic lock for four legs |
|||
|
Main body structure |
||||
|
Material |
High-quality carbon steel profile with aluminum alloy anti-slip patterned plate |
|||
|
Tool box |
Mould stamping door with stainless steel door lock |
|||
|
Fencing |
Stainless steel tube |
|||
|
Wheel casing |
Injection mold molding, beautiful, high strength |
|||
|
Security configuration |
||||
|
Automatic interlock device for different operating position |
Prevent the risk of misoperation |
|||
|
Hand-operated emergency pump |
When the engine and the main pump failure, through the emergency system to send the worker back to the ground and the vehicle back to the running state |
|||
|
Emergency stop device for working platform |
Used for emergency stop operation and restricted boom operation |
|||
|
Automatically limit work range |
When the working range reaches the specified value, the dangerous direction is automatically restricted. |
|||
|
Leakage protection device |
Equipped with leakage protector to ensure the safety of power supply and power tools |
|||
16m aerial working truck upper body work Performance diagram
▶ Overall Overview:
The entire upper structure of the 16m aerial work platform is welded from Q345 low-alloy high-strength steel plates, consisting of a three-section telescopic straight boom, compatible with Isuzu chassis. The maximum working height is 16m, and the standard rated load is 200kg. The complete set includes the slewing assembly, boom, hydraulic system, outriggers, work bucket, electrical control system, subframe, and toolbox assembly. It features multiple safety protections including work/driving interlock and overload self-locking.
▶ Subframe and Walkway Protection Assembly:
1. Subframe: Double-layer reinforced bent beam, rigidly bolted to fit the chassis beam, distributing the boom's operating load, with built-in hydraulic pipeline cable channels;
2. Walkway Enclosure: Full-vehicle anti-slip patterned steel walkway, stainless steel protective railing, integrated stamped toolbox on the left side for storing tools, oil pipes, and accessories;
3. Steps: Equipped with anti-slip steps and a small ladder for accessing the work platform.
1. Slewing Bearing: Single-row four-point contact ball-type large gear disc with dustproof seal, supporting 360° continuous slewing without dead angles, with buffer deceleration for shock-free slewing;
2. Slewing Table Boom Base: Thickened steel plate welded together, bearing the entire boom luffing and telescopic cylinders;
3. Slewing Table Operating Position: Standard configuration includes main operating control handle, emergency stop button, engine start/stop switch, outrigger status indicator light, and fault alarm buzzer;
4. Safety Interlock: When the outriggers are not fully extended and landed, the slewing table and boom movements are forcibly locked to prevent accidental tipping.
▶ Hydraulic Outrigger and Working Bucket Assembly：
Hydraulic Outrigger
Type: Front double V-shaped outriggers, rear double H-shaped telescopic outriggers; each outrigger can be lifted independently or simultaneously leveled.
Working Bucket
1. Material: One-piece molded aluminum alloy/stainless steel; standard dimensions 1400×700×1000mm; anti-slip base plate; heightened safety railings.
2. Leveling System: Volumetric differential automatic leveling; the basket remains level at any angle of the boom, with no tilting or weightlessness.
▶ Hydraulic Power System:
1. PTO: Power take-off unit on the chassis gearbox side, driving a high-pressure gear pump to provide power to the entire machine;
2. Valve Group: Electro-hydraulic proportional multi-way directional valve, allowing stepless speed regulation of boom rotation/telescopic/luffing/outrigger operation, ensuring smooth and shock-free movement;
3. Safety Protection: System overflow stabilization, overload pressure relief, balance locks for all cylinders, and an emergency manual pump (allowing for boom and outrigger retraction after engine shutdown);
4. Piping: High-pressure steel wire braided hydraulic hoses, compression fittings for explosion-proof operation, with all piping located inside the boom for wear protection.
▶ Multi-mode control system:
The machine features three operating modes for flexible and convenient operation:
1. Fixed operating position on the turntable;
2. Remote operation via wireless remote control box;
3. Ground-based hydraulic manual handle operation; Multiple operation points are interlocked, ensuring that only one location can control the equipment at a time, avoiding operational conflicts.
▶ Applicable Scenarios:
Municipal street light maintenance, surveillance camera installation, traffic sign erection, high-altitude landscaping pruning, factory equipment maintenance, residential building exterior wall maintenance, power line maintenance, advertising installation, and other high-altitude work scenarios.
10units 16m man lift boom truck upper body kits
10 units 16m aerial platform truck body kits exported to Honduras
Bottom price high quality 12m high altitude operation truck,Isuzu 22m folding arm high altitude operation truck,20M Isuzu High altitude operation aerial truck vehicles 20m aerial platform truck)
Learn More
20m ELF high altitude operation truck with hydraulic booms,New isuzu high altitude working truck hot sale high lifting platform truck, ELF Handler 20m articulated series aerial work platform truck/high altitude operation truck
Learn More
Basket cranes, Aerial Platform Lift Bucket Truck,Aerial Access Platforms,Aerial Platform Trucks,Truck mounted telescopic aerial platform,ISUZU Hydraulic Aerial Platform Truck
Learn More
ISUZU Boom lift, bucket truck, bucket boom truck, aerial working platform (truck mounted), truck mounted aerial platform, truck mounted aerial lift, aerial platform truck
Learn More
ISUZU 700P 4×4 Truck mounted aerial work platform, also called manlift truck, bucket truck, is specially designed and produced for aerial work or operation.
Learn More
