Isuzu 22m bucket truck

Isuzu aerial platform truck a newly designed Isuzu boom lift truck, Isuzu 22m bucket truck, which is a fully functional, safe and reliable commercial vehicle designed to provide convenience and safety for working at heights. Its aerial platform, chassis, drive system, safety equipment and other aspects have been carefully designed to meet the needs of high-altitude operations. Whether working at heights such as construction sites, repairing equipment or cleaning windows, the Isuzu aerial platform truck is a reliable work platform. Which providing a safe and efficient working platform. It is widely used in construction, maintenance, cleaning, electricity, communications and other fields, and is especially suitable for places that require maintenance, installation or other operations at high altitudes.

Main Component for Isuzu 22m bucket truck from POWERSTAR:

1. PTO System: PTO system consisted of the oil pump, PTO, electrical control switches and pneumatic solenoid valve. The system working in output the power to oil pump storage as a hydraulic energy. This system is controlled by an on/off switch that installed in the driving cab, through the interior of the switch’s joint or separation, lead the gear be driven from the transmission make the  pump stop or working.

Attention: When Isuzu 22m Bucket Truck in driving, PTO should be in position of OUT-OFF transmission; make sure the oil pump not in RUNNING.

2. Slewing Rotation System: Slewing rotary system consisted by the hydraulic motor, gear reducer, slewing gear, etc. The system worked as: hydraulic motor drive the reducer, the small gear, in reducer output shaft, drive the slewing ring move, and slew the saddle turnable.

3. Centre Slewing Joints: The center slewing joints, installed in the center of rotatory saddle, achieved the oil and electric power through the truck. As the system equipped with rotatory rings, the hydraulic oil pipes and electric wires would not twisted together.

4. Hydraulic System: The hydraulic system hydraulic oil supplied by ONE pump, worked pressure at 14Mpa, flux as 25L/Min, the pressure adjustable by an overflow valve. When the PTO coupling with the transmission ,the pump will in a situation of running, the oil output from the oil tank to all the legs which controlled by a control valve equipped in the control panel. Finished leg operation, handle the operation poke into position marked as, then, the oil would derived from leg system to “To arms”, and the upper control panel would be active, and then could start the next operation works.

How to lubrication the Isuzu 22m bucket truck from POWERSTAR:

Please lubricate all main parts according to the following table in order to increase of service life of all parts. The chassis lubrication should been operated with chassis manual.