ISUZU crew cab 13m Articulated Boom Lift
The Isuzu NIKA 13-meter aerial work platform truck features a 3360mm wheelbase, an Isuzu 4KB1-TCG60 engine, an MSB 5-speed transmission, a 3-section quadrilateral folding boom with 360-degree rotation, and electronic control of the turntable and basket, as well as hydraulic control from the ground. It is equipped with front and rear outriggers and multiple safety devices. It has a 1-ton hook, a maximum working height of 13 meters, a maximum working radius of 6.2 meters, and a maximum lifting capacity of 1 ton.
Manufacturer:
Powerstar TrucksWork capacity:
13mDimension:
5990 x 2100 x 3000 mmCabin type:
Isuzu NIKA double row cab,2+3 seats, with A/C,USBWheelbase:
3360mmEngine power:
130HP/96kwEngine type:
ISUZU 4KB1-TCG60Axle drive:
4x2,LHDGear box:
ISUZU MSB 5-speed,manualRemarks:
Work capacity can be customizedThe boom lift of this articulated boom lift uses a new type of high-quality steel, offering high strength and light weight. It can perform suspended operations, traverse obstacles, or perform multi-point operations from a single lifting point. The work platform can be raised, extended horizontally, and rotated, easily traversing obstacles to reach the work position, making it an ideal aerial work platform.
This ISUZU crew cab 13m Articulated Boom Lift is highly maneuverable and easy to move between sites. It is suitable for large-scale aerial work such as municipal street light installation and maintenance, power emergency repairs, aerial photography, billboard installation and replacement, traffic signal camera installation and maintenance, garden tree pruning and fruit removal, bridge construction, and operations at stations, docks, shopping malls, stadiums, residential properties, factories, mines, and grain depots.
✦ Product Parameters:
|
Isuzu 13m aerial working truck |
|||
|
General |
|||
|
Vehicle Brand |
POWERSTAR |
||
|
Overall Dimension |
5990 x 2100 x 3000mm |
||
|
GVW / Kerb Weight |
4495/4170kg |
||
|
Chassis Description |
|||
|
Cab |
Isuzu NIKA double row cab,2+3 seats, with A/C,USB |
||
|
Wheel base |
3360mm |
||
|
Axle |
Front axle |
1805kg |
|
|
Rear axle |
2690kg |
||
|
Braking system |
Air brake |
||
|
Transmission |
Isuzu MSB 5-speed,manual |
||
|
Tire specification |
700R16,6+1 |
||
|
Engine Description |
|||
|
Engine manufacture |
Engines |
||
|
Engine model |
ISUZU 4KB1-TCG60 |
||
|
Horse power |
130HP/96kw |
||
|
Displacement |
2499ml |
||
|
Emission standard |
Euro 6 |
||
|
Working condition |
|||
|
Max. working height |
13m |
||
|
Working radius at maximum working height |
3m |
||
|
Max. working radius |
6.2m |
||
|
Working height at maximum working radius |
8.6m |
||
|
Rotation Angle |
360° continuous rotation in both directions |
||
|
Boom |
|||
|
Type |
3 section knuckle arm type, Quadrilateral section |
||
|
Boom luffing angle |
0-70° |
||
|
Hook |
Max lifting weight 1 tons |
||
|
Max lifting height |
6.8m |
||
|
Outrigger |
|||
|
Type |
H type |
||
|
Number |
4 |
||
|
Adjustment |
Adjusted separately |
||
|
span |
Longitudinal:3240mm;Transverse: 3180mm |
||
|
Basket |
|||
|
Rated loading |
≤200Kg,anti-slip floor |
||
|
Size |
1080X620X1150 mm |
||
|
Leveling Type |
External Tie Rod Mechanical Leveling |
||
|
Leveling Device |
Mechanical Leveling, External Tie Rod |
||
|
Safety belt |
1 set |
||
|
Control system |
|||
|
Outriggers |
Manual Operation, Individually Adjustable Outriggers, Interlocked for Getting On and Off the Vehicle |
||
|
Operating Method |
Manual and Electric Combination |
||
|
Boom Movement |
Electric Dual-Position Operation of Turntable and Basket |
||
|
Engine Start/Stop |
Dual-Position Operation of Turntable and Basket |
||
The vehicle adopts an Isuzu NIKA light truck chassis with a wheelbase of 3360mm and a double-row cab. The power unit is equipped with a 4KH1CN6LB 120HP engine, providing strong power and a maximum torque of 360N·m; the transmission is matched with an MSB five-speed manual gearbox, with clear gear logic and convenient operation for city start-stop and short-distance transfers.
Boom Type: Three-section folding boom，Quadrilateral
Material: Q345B/4mm profile
Elevation Angle: 0°–70° (relative to horizontal plane)
Maximum Working Height: 13m
Working Radius at Maximum Working Height: 3m
Maximum Working Radius: 6.2m
Working Height at Maximum Working Radius: 8.6m
Slewing: 360° continuous slewing in both directions
Lifting jib
Maximum Lifting Capacity: 1000Kg
Maximum Lifting Height: 6.8m
Hook: 1T
Type: Front and Rear H-type
Material: Q345B/5mm profile
Span: Longitudinal (mm): 3240, Lateral (mm): 3180
Hydraulic Locks: All four outriggers are equipped with two-way hydraulic locks
Outrigger Strobe Lights: Yellow; 4 units
Materials: High-quality carbon steel and profiles, paved with 3mm anti-slip patterned steel plate
Toolbox: 1200*400*500; die-stamped door with stainless steel lock
Fence: Φ20 stainless steel pipe
Steps: Side steps on the driver's cab
Upright Arm: Constructed from welded low-alloy steel plates
Slewing Bearing: Single-row four-point contact ball bearing with external gear, QWD730.20
Reducer: Worm gear type, CW-28
Motor: BMP-50
Rated Load: ≤200Kg
Dimensions: Length x Width x Height (mm): 1080×620×1150
Leveling Method: External tie rod mechanical leveling
Safety Belt: One set
Leveling Device: Mechanical leveling, external tie rod
Hydraulic Oil Tank: 65L; with level gauge
Gear Pump: Fixed displacement pump, flow rate 25ml/r
Working Pressure: With pressure gauge; 16MPa
Hydraulic Valve Assembly: Integrated solenoid valve assembly
Cylinders: 11; with two-way balance valve or hydraulic lock for safety
Outriggers: Manual operation, each outrigger is individually adjustable, interlocked when getting on and off the vehicle
Operation Method: Manual and electric combination
Boom Movement: Electric dual-position operation of turntable and basket
Engine Start/Stop: Dual-position operation of turntable and basket
Engine Throttle: Manual cable pull
Interlocking during loading and unloading prevents misoperation; a two-way balance valve and a two-way hydraulic lock ensure smooth boom movement and reliable outrigger locking, respectively; an emergency stop device and an auxiliary lowering device provide double protection against emergencies.
 |
 |
 |
Isuzu Chassis 14m Truck Mounted Aerial Working Platform Isuzu Brand 14M Telescopic Boom Aerial Working Platform Technical Parameters (PT5061JGK10S GKS-14QX) Working Condition 1, Altitude: 0-1000m 2, Temperature: -25° C--+45° C, environmental relative humidity ≤ 90% 3, Allowed working condition: Solid, stable land, the vehicle should be horizontal 4, Wind force: ≤ 6 degree (wind speed ≤ 12.5m/s ) Working Range PT5061JGK Telescopic Boom Aerial Working Platform can be applied in various conditions for aerial working, such as urban road, suburban road, highway, airport, bridges and culverts and so on. The structure type is telescopic boom and the lifting boom is flexible, convenience and performance with the negative point, more suitable for narrow site conditions or other special operations. Bulletin No. KFM5061JGK10S Type GKS-14QX External dimensions ( mm ) 7050×2020×3250 Structure type Three-section telescopic boom Working Cage Internal size ( mm ) 1200×600×1100 Rated loading ( kg ) 200 ( or 2 persons ) Max. Working height ( mm ) 14000 Max. Height from ground ( mm ) 12300 Max. Working radius ( mm ) 9300 Working radius when doing the highest height ( mm ) 1320 Working Boom Lifting angle of main boom ( º ) -24_78° Out rate speed ( mm/sec ) 8500/50 Ret rate speed ( mm/sec ) 8500/50 Boom rack rotation angle ( º ) 360 Boom rack rotation speed ( r/min ) 1.0 Outrigger Vertical span ( mm ) 3050 Horizontal span ( mm ) 3600 Traveling of vertical outrigger ( mm ) 450 Adjustment Single adjustable
Learn More
Isuzu bucket truck lift,Isuzu truck mounted aerial lift,ISUZU Bucket Articulating Truck Mounted Lift
Learn More
Truck Mounted Aerial Work Platforms,Isuzu rotary platform and the working basket,Isuzu Vehicle Mounted Boom Lift three telescopic arms truck
Learn More
Isuzu Truck Mounted Aerial Work Platforms,Isuzu truck mounted boom lift,Isuzu 2 Ton Truck Mounted Aerial Lift
Learn More
