Dominica 16CBM Mobile waste compactor vehicle ISUZU
This vehicle is built on the Isuzu FVR chassis with an optimized wheelbase of 4500mm. It is equipped with an Isuzu 6HK1-TCG61 240HP engine and a Fast 8-speed transmission. The upper body is a 14-cubic-meter arc-shaped T420 high-strength steel box. The rear is not tilted, and garbage can be dumped while standing on the foot pedal. It has a CAN-BUS integrated control system and multiple operation points.
Manufacturer:
Powerstar TrucksWork capacity:
16cbmDimension:
9120 x 2550 x 3240 mmCabin type:
Isuzu NEW FVR GIGA 5X cabin,one and half rowWheelbase:
4500mmEngine power:
240HP/177 KWEngine type:
ISUZU 6HK1-TCG61Axle drive:
4x2,LHDGear box:
FAST 8-speed,manualRemarks:
Flip mechanism availableThe Dominica 16CBM Mobile waste compactor vehicle ISUZU features an Isuzu 6HK1 engine, a Fast 8-speed transmission, and a large 16 cubic meter container. It integrates multiple manual control levers and a control box for convenient and easy operation. The vehicle utilizes a CAN-BUS system, with hydraulic drive and pneumatic assistance to achieve coordinated control throughout the loading, compression, and unloading process. Its bidirectional compression structure ensures dense compaction with a 1:3 compression ratio, significantly increasing the single-load capacity. Widely applicable to the routine collection and transportation of household waste in residential areas, commercial streets, and industrial parks, it is durable, easy to maintain, and offers outstanding efficiency in sanitation operations.

|
Isuzu FVR 16cbm waste compactor truck |
||
|
Truck model |
PT5180ZYS |
|
|
Cabin |
Isuzu NEW FVR GIGA 5X cabin,one and half row,2 passengers, air conditioner,USB |
|
|
Overall Size |
9120*2550*3240 mm |
|
|
Bin capacity |
16CBM |
|
|
Wheel base |
4500mm |
|
|
GVW |
18000kg |
|
|
Curb weight |
11380kg |
|
|
Axle loading |
6500/11500kg |
|
|
Engine |
Model |
Isuzu 6HK1-TCG61 |
|
Type |
4-stroke direct injection,6-cylinder in-line with water cooling, turbo-charging and inter-cooling |
|
|
Hose Power(HP) |
240HP/177 KW |
|
|
Displacement |
7.79ml |
|
|
Max torque |
850N.m |
|
|
Tire |
295/80R22.5(6+1 tire) |
|
|
Transmission |
FAST 8-speed,manual |
|
|
Superstructure |
Body capacity |
16cbm |
|
Box material |
Side 4mm,bottom 5mm;T420 high-strength steel plate |
|
|
Design |
Whole unit with Leakage Proof Design |
|
|
Sewage tank |
0.85+1.5 m³ |
|
|
Filling work cycling time |
≤45 s |
|
|
Garbage Compact Ratio |
1:3 |
|
|
Discharge model |
Horizontal Ejection |
|
|
Hydraulic system pressure |
≥18 MPa |
|
|
Control system |
CAN electric automatic control, pneumatic system, and hydraulic system control |
|
|
Operate modes |
Passenger side manual joystick,tailgate electric control box,tailgate manual operation lever |
|
|
Control panel |
English or Your language |
|

• Garbage container: Effective volume 16 cubic meters, made of T420 high-strength steel plate, with an arc design, 5mm thick bottom plate and 4mm thick side plates, high strength, deformation resistance, and corrosion resistance; the vehicle is equipped with front and rear dual sewage tanks, sealed and leak-proof.
• Rear Loading: No rear tipping, equipped with a foot pedal with handles for manual dumping of garbage.
• Compression Ratio: 1:3, using bidirectional compression technology, significantly improving single-trip transportation efficiency.
Isuzu FVR 16CBM rear lifting garbage truck upper structure
The vehicle utilizes a CAN BUS integrated control system, enabling distributed operation from multiple locations:
• Passenger-side manual control valve: Controls push-out/retraction of the push-blade, loading device lifting, etc.
• Garbage container right side control box: Contains safety buttons, and buttons for tailgate cleaning, push-blade extension/retraction, tailgate lifting, and engine acceleration.
• Tailgate left and right side control boxes: Contains start, stop, engine throttle, driver's warning light, emergency stop buttons, single/continuous cycle knobs, and push-blade extension/retraction and tailgate lifting knobs.
• Tailgate right-side manual control lever: Controls slide plate movement, scraper opening/closing, push-blade extension/retraction, tailgate lifting, etc.


★ Fault Symptom: PTO cannot engage gears
Causes and Solutions:
1. Low air pressure in the vehicle's air system ☛ Increase air pressure in the air system
2. Air leak in the PTO control air system ☛ Inspect the PTO control air system
3. Damaged PTO shift gears, shift forks, shift fork shafts, or spline sleeves ☛ Replace the damaged parts

★ Fault Symptom: Hydraulic system has no pressure or the pressure is too low.
Causes and Solutions:
1. Damaged oil pump with severe internal leakage. ☛ Inspect and analyze the damage, repair or replace.
2. Damaged multi-way valve (including severe valve core leakage, abnormal pressure regulation of the relief valve). ☛ Inspect and analyze the damage, repair or replace.
3. Excessive air in the hydraulic circuit. ☛ Bleed the air.
4. Clogged oil filter. ☛ Clean or replace the filter element.
5. Deteriorated hydraulic oil. ☛ Replace the hydraulic oil.

★ Fault Symptom: Oil leakage from the cylinder piston rod
Causes and Solutions:
1. Damaged sealing ring ☛ Carefully inspect the guide sleeve and replace the sealing ring.
2. Scratches on the piston rod surface ☛ Replace the relevant parts.

★ Fault Symptom: Hydraulic oil temperature too high
Causes and Solutions:
1. Control valve in working state for a long time ☛ When not in operation, the control handle should be reset.
2. Incompatible hydraulic oil specification ☛ Replace with hydraulic oil of the correct specification.
3. Excessive speed ☛ Adjust to the appropriate speed.
4. Internal leakage ☛ Carefully inspect the oil pump, valve assembly, and cylinder; troubleshoot and repair after identifying the root cause.

★ Fault Symptom: Gear oil pump not producing oil or insufficient oil level
Causes and Solutions:
1. Pump not rotating ☛ Damaged pump spline or PTO cannot engage gear
2. Clogged suction pipe or suction filter ☛ Analyze, check and remove blockage
3. Insufficient hydraulic oil ☛ Add hydraulic oil to the specified level
4. Worn or damaged internal pump components ☛ Replace or repair
5. Damaged seals ☛ Replace

★ Fault Symptom: Gear oil pump overheating abnormally
Causes and Solutions:
1. Excessive air in the oil circuit ☛ Bleed the air
2. Insufficient hydraulic oil ☛ Add hydraulic oil to the specified level
3. Add hydraulic oil to the specified level ☛ Analyze, check and remove blockages

★ Fault Symptom: Loading action cannot cycle.
Causes and Solutions:
1. Sensor not detecting position, unable to switch actions. ☛ Adjust sensor position or sensor plate position; sensor tail light illuminates when detected.
2. Sensor damaged. ☛ Replace with a new sensor.
3. Solenoid valve controlling a certain action is not working. ☛ Check solenoid valve wiring harness or air lines.
4. Loading action control button damaged. ☛ Replace button panel assembly.
5. Replace button panel assembly. ☛ Replace controller.

★ Fault Symptom: Working cycle too fast or too slow
Causes and Solutions:
Power take-off speed improperly adjusted ☛ Readjust speed