The Isuzu 700P rear loader compactor truck is modified on 4*2 drive chassis,4175mm wheelbase,equipped with 4HK1-TCG61 engine, 190 horsepower, 5193ml displacement,4-cylinder in-line turbocharged intercooler design,an MLD 6-speed gearbox,105km/h maximum speed. The garbage bin has a capacity of 10 cubic meters and is made of an arc-shaped integral steel plate. The bottom and side panels are both 4mm thick Q235 special steel, and the compression ratio reaches 1:3.4. The garbage loading and unloading system adopts PLC automatic control.
Work capacity:
10cbmEngine power:
190HPEngine type:
4HK1-TCG61Axle drive:
4x2,LHDGear box:
MLD-6Q,manualRemarks:
Equipped with Isuzu powerful 4HK1 engineThe Isuzu ELF cabin rear loader compactor truck is an efficient and durable vehicle designed specifically for urban environmental sanitation. It integrates advanced garbage collection and compression technologies to improve the efficiency and convenience of urban garbage disposal.
● 30 years experience on rear loader truck designing
● 50 units Isuzu garbage compactor truck in stock, 5 cbm, 8 cbm, 12 cbm
● Fast delivery time, Quick 10 days shipping time
● 24 months long guarantee time assurance
● CKD, SKD parts service, Container shipping, Save freight
Key Features:
★ Various size body from 3cbm to 25cbm,with beautiful appearance
★ ISUZU 4HK1 engine,super powerful;reliable performance. no overhaul,within 1000000km
★ Good sealing, no secondary pollution caused by sewage leakage when dumping garbage
★ Adopting electric, gas and hydraulic centralized control, with automatic and manual operation modes
★ Diffient rear flip systerm are optional
★ Can be put into 20",40"container and ship to worldwide
The Isuzu 700P compression garbage truck is an efficient and durable vehicle designed specifically for urban environmental sanitation. It integrates advanced garbage collection and compression technologies to improve the efficiency and convenience of urban garbage disposal.
The working principle of the compression garbage truck is basically divided into two types: loading and unloading. There are five key actions in the compression garbage truck, namely, the flipping and retraction of the flip plate, the opening and closing of the scraper, the descending and raising of the scraper, the retraction and pushing of the push plate, and the lifting and locking of the tail. These are the five main actions of the garbage truck.
When the filling hopper is full of garbage, the scraper opens, and the slide drives the scraper to move downward together, inserting into the garbage for crushing and initial compression, and the scraper rotates forward to further compact the garbage. After the scraper is in place, it moves upward with the slide to compact the garbage and fill it into the garbage bin, and then returns to the starting position. The entire working process is automatically controlled. When the garbage is continuously compressed and filled, the push shovel overcomes the back pressure and gradually retreats under the action of the extrusion force, realizing the two-way compression of the garbage and evenly filling the entire garbage bin.
|
Isuzu 700P 10cbm rear loader compactor |
||
|
Vehicle Model: |
PT5110GXH |
|
|
Chassis Dimensions and Parameters |
Overall Dimension(L x W x H) |
7750x2350x2550mm |
|
Wheelbase: |
4175mm |
|
|
Front/ Rear Wheel Distance: |
1680/1650mm |
|
|
Front/Rear Suspension |
1110/2465mm |
|
|
Rear Axle Ratio: |
4.1 |
|
|
Weights and Capacities |
Curb Weight: |
5500Kg |
|
Payload: |
6000Kg |
|
|
GVW: |
11000Kg |
|
|
Axle Loads: |
4000/7000kg |
|
|
Engine |
Type: |
4 cylinder inline,4 strokes,water cooling,turbo inter cooling,diesel engine |
|
Engine Model: |
4HK1-TCG61 |
|
|
Max output: |
140Kw |
|
|
Displacement: |
5193ml |
|
|
Horsepower: |
190HP |
|
|
Exhaust Gas Treatment Technology： |
EGR |
|
|
Max Torque |
507N.m |
|
|
Rated speed |
2600rpm |
|
|
Maximum torque speed |
1600-2600rpm |
|
|
Transmission |
Transmission: |
MLD-6Q |
|
Forward Gear: |
6 Speed Gear |
|
|
Backward Gear: |
1 Speed Gear |
|
|
Brake |
Hydraulic Brake |
|
|
Front Drum Back Drum |
||
|
Generator |
24V-80A |
|
|
Cab |
Number of Seats: |
3 |
|
Chassis |
Drive Type: |
4x2 |
|
Tires: |
7(Including Spare Tire) |
|
|
Fuel Tank |
Number: |
1 |
|
Capacity: |
100L |
|
|
Top Parameters |
Garbage Container Capacity |
10m3 |
|
Filler Volume |
1.5m3 |
|
|
Compression ratio |
1:3.4 |
|
|
Cycling time of Filling |
≤25S |
|
|
Lifting time of Filler |
8-10S |
|
|
Time of Discharging |
≤45S |
|
|
Hydraulic System Pressure |
20Mpa |
|
|
Hydraulic system control mode |
Manual/electric integrated control |
|
|
Oil cylinder type |
Double-acting piston type |
|
|
Oil pump |
Dual gear pump |
|
|
Directional control valve |
Multiple way reversing valve |
|
|
Manipulator configuration |
Standard double barrel manipulator |
|
|
Configurations |
1 |
Power Steering System |
|
2 |
Air Conditioning |
|
|
3 |
Retro-Reflective Marking |
|
|
4 |
ABS |
|
|
5 |
Tubeless Tire |
|
|
6 |
Free Maintenance Battery |
|
Operation steps
1. Preparation before operation:
● Check the safety of the vehicle's surrounding environment to ensure that there is no oil or water leakage in the vehicle.
● Check whether the hydraulic oil level is at the upper end of the level gauge to ensure that the hydraulic oil is sufficient.
● Get on the vehicle and start the vehicle. After the air pressure reaches the specified value, step on the clutch, press the power take-off switch, slowly release the clutch, and start the hydraulic system.
2. Loading garbage operation:
● Pour the garbage into the garbage bucket.
● Turn the operating knob to the "up" gear to keep the garbage poured into the filler bucket.
● Press the "one-button cycle" or "continuous cycle" button to perform actions such as scraper expansion, slide board downward, scraper scraping, and slide board upward to load the garbage into the garbage bin.
3. Compressing garbage operation:
● During the loading process, as the garbage increases, the shovel gradually retreats under the push of the hydraulic cylinder, while the scraper and slide board continue to move to compress the garbage.
● When the garbage in the garbage bin reaches the preset height, stop loading and continue to perform the compression action until the garbage is compacted to the specified density.
4. Unloading garbage operation:
● Switch the working mode to "unloading" mode.
● Long press the "filler lift" button to lift the filler to an appropriate height.
● Long press the "bushing shovel push" button to push the garbage out of the garbage bin.
● After unloading, long press the "bushing shovel retract" button to retract the pushing shovel to its original position.
● Single-click the "cleaning button" to perform actions such as scraper opening, sliding plate downward, scraper closing, sliding plate upward, etc. to clean the garbage in the filler.
● Long press the "filler lowering" button to lower the filler to its original position and confirm the locking.
Factory direct sale ISUZU ELF 700P rear loader garbage truck, high quality ISUZU 190HP 8CBM garbage compression trucks, ISUZU rubbish compactor manufacturer.
Learn More
Custom-made ISUZU ELF 700P hook lift garbage compactor truck, high quality ISUZU 190HP medium duty hook lift waste compactor truck, ISUZU rear loader manufacturer.
Learn More
This ISUZU trash truck rear loader is equipped with an advanced compression device that uses high-pressure air to compress the garbage into small pieces, thereby reducing the volume of the garbage and improving the removal efficiency. At the same time, the vehicle is also equipped with environmental protection equipment, which can effectively reduce exhaust gas and noise pollution, making a positive contribution to urban environmental protection.
Learn More
The ISUZU rear load trash truck is a modern environmentally friendly garbage cleaning equipment produced by POWERSTAR. It integrates mechanical, electrical, hydraulic, control and other technologies into one, and can efficiently and quickly collect, compress and remove garbage. It is an important tool for urban cleaning work.
Learn More
Isuzu 700P 4x4 8 cubic garbage compactor is a professional vehicle for garbage collection and transportation. It is modified on the basis of Isuzu 700P all-wheel drive chassis, with a wheelbase of 4175mm. The vehicle is equipped with Isuzu 4HK1-TCG61 diesel engine, 5193ml Euro 6 emission, and Isuzu MLD 6-speed gearbox; the vehicle is equipped with an 8-cubic arc-shaped carbon steel compactor garbage bin, and the tail is equipped with a bucket flipping mechanism, which can hang such as 240L, 660L, and 1100L garbage bins. The vehicle is controlled by a PLC electronic control system and a manual hydraulic system. The operator can control the loading and unloading of garbage through three operating methods: the electronic control box in the cab, the manual hydraulic operating valve on the driver's side, and the tailgate electronic control box.
Learn More
The Isuzu 700P rear loader compactor produced by POWERSTAR is a municipal vehicle used for garbage collection,which is modified on the Isuzu 700P chassis,with 4175mm wheelbase,Isuzu 4HK1 190HP powerful diesel engine,Isuzu MLD 6 shift gearbox,with A/C,USB, direction assistance,the vehicle has a 10cbm large garbage capacity for waste collection.
Learn More
The ISUZU NPR light-duty garbage compactor truck is a city service garbage truck with excellent performance. It is equipped with a 4HK1-TCG61 engine with a maximum power of 190 horsepower and a displacement of 5.19L. It adopts a 4-cylinder in-line turbocharged intercooler design. The total weight of the vehicle is 11 tons, and the actual load capacity is 4.9 tons. The chassis is 4*2 drive and the wheelbase is 4175mm. The garbage bin has a capacity of 10 cubic meters and is made of curved integral steel plates. The bottom and side plates are both 4mm thick Q235 special steel, and the compression ratio reaches 1:3.4. It is equipped with a 6-front and 1-rear gearbox, with a maximum speed of 90km/h and a fuel tank capacity of 100L. The garbage loading and unloading system adopts PLC automatic control.
Learn More
POWERSTAR's Isuzu 700P 10cbm rear loader compactor is used for garbage collection and disposal.With 4175mm wheelbase,4HK1 190HP engine,Euro 6 diesel 5193ml emission,Isuzu MLD 6-shift gearbox,with A/C,USB,direction assistance,3 seats.The upper body is a 10cbm garbage bin,rear is a bucket flip mechanism,there are 4 methods to operation the truck 's loading and unloading.
Learn More
